On 3/13/2013 3:10 PM, Cory Smelosky wrote: Ahhh. "Solaris timing uses a real-time clock that can generate interrupts at a resolution bound by the processor speed. For scheduling purposes, it fires every 10 milliseconds. As in Linux, this is a clock "tick." Note that 2.6 Linux uses a 1000-tick/second clock, as opposed to the 100-tick/second clock used by Solaris and by previous versions of Linux. User-level programs on Solaris can program the real time clock to fire at nanosecond granularity, rounded up by processor time--much finer than the clock tick granularity of ten or one milliseconds. However, the program interface to use the high-resolution timers is not visible in the DDI/DKI. See clock_settime(3rt) for user-level details andusr/src/uts/common/os/cyclic.c for details on high-resolution timing in Solaris. Also note that in Solaris, you can change the value of hz or clock ticks/second by setting hires_tick to 1 and hires_hz to the desired time in the /etc/system file. The default is 1000 ticks per second. Here's an example: set hires_tick=1 set hires_hz=10000 <~--- 10000 ticks per second" Looks like Solaris can set it in user mode, too. Are you going to take a stab at this, Mark? If not, I will. -brian