[HECnet] KLH10 on Raspberri Pi / Nodelist update

Hi. On 2012-12-03 10:24, Jordi Guillaumes i Pons wrote: Hello, Please add to the HECnet nodelist: 7.79 BITXT0 TOPS-20(PANDA) - KLH10 - Raspbery Pi Done. Johnny I am running this simulator in the same Pi which currently holds 5 more VMs. I will see if it keeps stable, and if it does I will run it permanently. Issues to solve - KLH10 does not idle in the Pi. I'll check the idler device code to see if I can guess what is happening. - I tried to give KLH10 its own bridge device, plugged into the rest of my network via VDE switches and plugs, but it does not work. I have lots of IPBLP bugchecks and IP networking is unusable (weird enough, DECNET and LAT seem to work). It works fine if I use the main host interface in non-exclusive mode (but then I don't get LAT). - KLH10 frontend can't load *.EXE files. - TOPS-10 does not run well. I used a x86 KLH to dump the load code in SAV format and then I can boot TOPS-10, but it hungs after a while. On the other hand, I'm thinking about building a blinkenlights device using the GPIO pins of the Rasp-pi basing it on the actual parallel port blinkenlights panel driven by the "lites" device... :) It could be another nice hobby project... Jordi Guillaumes i Pons jg at jordi.guillaumes.name HECnet: BITXOV::JGUILLAUMES -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol