Yeah, sorry. I wrote the wrong number.
The problem is still the same, though.
Just because your MicroVAX shows adjacency up don't mean it is so. The 
other side (all of them), think that 31.282 is not up. So you only have 
the circuit up from one side, which is not enough.
   Johnny
On 2025-09-05 19:41, Brian Roth wrote:
  I'm confused? Geezer is 31.279 not 278. 278 is
HOWARD and it is a router 
 on the network. It can communicate with all other nodes and I just did a 
 set host with IMPVAX 31.1.
 I shutdown Howard (278) and now the microvax (SCOOBY) shows my Pydecnet 
 router 31.279 (geezer) as its designated router after a SHOW Circuit but 
 still a no go.
 
 On Friday, September 5, 2025 at 01:15:07 PM EDT, Johnny Billquist 
 <bqt(a)softjar.se> wrote:
 
 
 Well, GEEZER (31.278) is not seeing 31.282 as up. So that's why you have
 a problem. This usually means that packets are working in one direction,
 but not the other.
 
 Was this a real machine? How have you connected it to the rest of the
 network?
 
    Johnny
 
 On 2025-09-05 18:45, Brian Roth wrote:
  The address is 31.282. No File access, Phone or
NCP Tell to other nodes
 but it is still able to go out and find a router. It (31.282) can phone
 itself and set host but other nodes it just hangs. If I phone another
 node it will just sit at "Establishing Decnet Link and then error to
 "Node is not reachable.
 Brian.
 On Friday, September 5, 2025 at 12:38:11 PM EDT, Johnny Billquist
 <bqt(a)softjar.se <mailto:bqt@softjar.se>> wrote:
 No. Qbus ethernet or Unibus ethernet makes no difference here.
 Does anything else work? NCP to other nodes? Phone? File access?
 What's the address of that microvax?
    Johnny
 On 2025-09-05 17:59, Brian Roth wrote:
  > Hello, I currently have 8 simh vax machines on Hecnet all working  
 fine.
   > Its a mix of machines running VMS 3.5 to
7.3 and while some were a bit
  > of a challenge they all talk. I recently configured a Microvax II with
  > MicroVMS 4.6 as well as Decnet 4.6 and assigned it to my area 31. The
  > network loads without errors and I am able to SET HOST to itself butto
  > no other nodes in my area or vice versa. SHOW KNOWN CIRCUITSshows the
  > hosts I manually defined. SHOW KNOWN CIRCUITS CHARACTERISTICS shows a
  > designated router in my area so its finding that. If I bringa router
  > node down it successfully finds another in the area.
  >
  > The microvax node:
  >
  > Known Circuit Volatile Characteristics as of  5-SEP-1987 11:37:16
  >
  > Circuit = QNA-0
  >
  > State                         = on
  > Service                     = disabled
  > Designated router     = 31.278
  > Cost                          =4
  > Router priority           =64
  > Hello timer                = 15
  > Type                        = Ethernet
  > Adjacent node          =31.278
  > Listen timer              = 45
  >
  > The working nodes match with the exception of the circuit. All the  
 other
   machines
are UNA-0 (UNIBUS) and this one is of course QNA-0  Couldthis
 be the problem?
 Brian. 
  >
  >
  > _______________________________________________
  > HECnet mailing list -- hecnet(a)lists.dfupdate.se  
 
<mailto:hecnet@lists.dfupdate.se>
  <mailto:hecnet@lists.dfupdate.se>
  > To unsubscribe send an email to hecnet-leave(a)lists.dfupdate.se  
<mailto:hecnet-leave@lists.dfupdate.se>
  <mailto:hecnet-leave@lists.dfupdate.se>
 --
 Johnny Billquist                 || "I'm on a bus
                                   ||  on a psychedelic trip
 email: bqt(a)softjar.se <mailto:bqt@softjar.se>  
<mailto:bqt@softjar.se>           || Reading
  murder books
 pdp is alive!                   ||  tryin' to stay hip" - B. Idol
 _______________________________________________
 HECnet mailing list -- hecnet(a)lists.dfupdate.se  
<mailto:hecnet@lists.dfupdate.se>
  <mailto:hecnet@lists.dfupdate.se>
 To unsubscribe send an email to hecnet-leave(a)lists.dfupdate.se  
<mailto:hecnet-leave@lists.dfupdate.se>
  <mailto:hecnet-leave@lists.dfupdate.se>
 
 
 _______________________________________________
 HECnet mailing list -- hecnet(a)lists.dfupdate.se  
<mailto:hecnet@lists.dfupdate.se>
  To unsubscribe send an email to
hecnet-leave(a)lists.dfupdate.se  
 <mailto:hecnet-leave@lists.dfupdate.se>
 
 -- 
 Johnny Billquist                 || "I'm on a bus
                                    ||  on a psychedelic trip
 email: bqt(a)softjar.se <mailto:bqt@softjar.se>           ||  Reading 
 murder books
 pdp is alive!                    ||  tryin' to stay hip" - B. Idol
 
 _______________________________________________
 HECnet mailing list -- hecnet(a)lists.dfupdate.se 
 <mailto:hecnet@lists.dfupdate.se>
 To unsubscribe send an email to hecnet-leave(a)lists.dfupdate.se 
 <mailto:hecnet-leave@lists.dfupdate.se>
 
 _______________________________________________
 HECnet mailing list -- hecnet(a)lists.dfupdate.se
 To unsubscribe send an email to hecnet-leave(a)lists.dfupdate.se 
-- 
Johnny Billquist                  || "I'm on a bus
                                   ||  on a psychedelic trip
email: bqt(a)softjar.se             ||  Reading murder books
pdp is alive!                     ||  tryin' to stay hip" - B. Idol