6 Jun
2019
6 Jun
'19
9:26 p.m.
I am looking in IP and there isn't anything for MNC.
In terms of topology, I currently have two 3900s, Larry and Moe. Larry is
configured for the connection to HECNet. Moe is configured (decnet over
IP) to connect to Larry. This seems to work with both servers being able
to set host and see files on HECNet.
My idea was that I could have the PDP-11 (Frodo) point to Larry as well via
DECNet over IP.
Is this what you are describing?
Kurt
Directory DU0:[IP]
6-JUN-2019 15:09
NTPDATE.TSK;210 63. C 11-JAN-2019 03:13
NTPDATRES.TSK;210 42. C 11-JAN-2019 03:13
MAILD.TSK;123 237. C 11-JAN-2019 03:13
PCL.TSK;210 63. C 11-JAN-2019 03:13
PCLRES.TSK;213 33. C 11-JAN-2019 03:13
IFDRV.TSK;213 7. C 13-JAN-2019 14:47
IPDRV.TSK;213 14. C 13-JAN-2019 14:47
UDDRV.TSK;213 16. C 13-JAN-2019 14:48
TCDRV.TSK;213 35. C 13-JAN-2019 14:48
IFCONFIG.TSK;424 37. C 11-JAN-2019 03:13
NETSTAT.TSK;424 23. C 11-JAN-2019 03:13
PING.TSK;424 64. C 11-JAN-2019 03:13
TRACERT.TSK;424 16. C 11-JAN-2019 03:13
ETHACP.TSK;424 25. C 11-JAN-2019 03:13
RESACP.TSK;424 24. C 11-JAN-2019 03:13
RMD.TSK;400 217. C 11-JAN-2019 03:13
DHCP.TSK;409 67. C 11-JAN-2019 03:13
DHCPRES.TSK;409 45. C 11-JAN-2019 03:13
RWHOD.TSK;396 15. C 11-JAN-2019 03:13
TFTPD.TSK;396 64. C 11-JAN-2019 03:13
INETD.TSK;409 12. C 11-JAN-2019 03:13
SPOOF.TSK;409 12. C 11-JAN-2019 03:13
WWW.TSK;409 117. C 11-JAN-2019 03:13
WWWRES.TSK;409 94. C 11-JAN-2019 03:13
IRCBOT.TSK;409 66. C 11-JAN-2019 03:13
FTPD.TSK;409 62. C 11-JAN-2019 03:13
TELNETD.TSK;408 26. C 11-JAN-2019 03:13
TELNET.TSK;408 41. C 11-JAN-2019 03:13
TFTP.TSK;394 106. C 11-JAN-2019 03:13
IRC.TSK;408 72. C 11-JAN-2019 03:13
IRCRES.TSK;395 46. C 11-JAN-2019 03:13
FTP.TSK;409 67. C 11-JAN-2019 03:13
TELCOM.TSK;402 3. C 13-JAN-2019 14:48
Total of 1831./1831. blocks in 33. files
On Thu, Jun 6, 2019 at 3:17 PM Johnny Billquist <bqt at softjar.se> wrote:
If you have my TCP/IP installed, and you have
generated DECnet with the
Multinet lines, then things should be pretty easy. MNC might not be
installed, but MNC.TSK should be in [IP], so just install it then.
However, do you really have all your DECnet machines on separate
ethernets? Otherwise I would really recommend that you have DECnet on
your local ethernet, and just have one machine which is the router to
the outside from the ethernet segment. Individual point-to-point links
will not be as efficient as the ethernet.
Johnny
On 2019-06-06 21:09, Kurt Hamm wrote:
New issue. I am working to setup my (Oscar)
PiDP-11 on HECNet
(Decnet). The docs say that I need to run MNC to setup the links for
DECNet, but I can't find that application anywhere. I am assuming that,
for the PiDP-11, NETGEN and IPNET have been completed. I just need to
configure my circuits and make sure the PiDP-11 has the correct
area.node.
RSX-11M+ newbie, so sorry if I am missing something basic.
Kurt
On Thu, Jun 6, 2019 at 2:53 PM Johnny Billquist <bqt at softjar.se
<mailto:bqt at softjar.se>> wrote:
On 2019-06-06 15:04, Kurt Hamm wrote:
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
I wasn't sure where to post this question, so
I thought I would
start here.
I have two simh vax3900 machines. Larry and Moe. Larry is the
HECNet
router for Moe.
When I send email from Larry (via SMTP), the _return _email
address is
correct (SYSTEM at LARRY.MYDOMAIN.COM
<mailto:SYSTEM at LARRY.MYDOMAIN.COM> <mailto:SYSTEM at LARRY.MYDOMAIN.COM
<mailto:SYSTEM at LARRY.MYDOMAIN.COM>>.
When I send email from Moe (to LARRY::SMTP%"user at domain.com
<mailto:user at domain.com>
<mailto:user at domain.com <mailto:user at
domain.com>>"), the return
email address is:
SYSTEM at SCSSYSTEMID.MYDOMAIN.COM
<mailto:SYSTEM at SCSSYSTEMID.MYDOMAIN.COM>
<mailto:SYSTEM at SCSSYSTEMID.MYDOMAIN.COM
<mailto:SYSTEM at SCSSYSTEMID.MYDOMAIN.COM>>.
Why is Moe using the SCSSYSTEMID instead of the system name?
*I am missing something.*
I'm not sure how you should do a setup of mail relaying in VMS.
However, you can always send from Moe to MIM::user at domain.com
<mailto:MIM%3A%3Auser at domain.com>. Those
mails should then get correct addresses.
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se <mailto:bqt at softjar.se> ||
Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol