1 Jan
2016
1 Jan
'16
9:39 p.m.
Johnny,
Looks like the problem is TELNETD which is still active when the last active connection
has been closed. Maybe an additional line in IPREM?
.ifact telnet abo telnet
John.
On Jan 1, 2016, at 2:47 PM, Johnny Billquist <bqt
at softjar.se> wrote:
Hi.
The turning off of TCP/IP is a big kludgy, and do not properly handle if there are active
connections.
I would, in general, recommend that you just leave TCP/IP alone, and it will stop when
the system halts.
One day I'll get around to "fix" that part, but it's a low priority
thing.
If you want it to shut down cleanly, you need to check with NETSTAT/ALL, and the list
needs to be totally empty before you run IPREM.
Johnny
On 2016-01-01 19:28, John Forecast wrote:
Johnny,
Thanks for fixing the TELNETD configuration issue, it?s working
fine now. I have one additional problem during shutdown when IPREM is
called from lb:[1,2]shutup.cmd I get the following error:
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol ifc stop
Stopping IP.
Stopping UD.
TC not running..
abo ethacp
TCP/IP - ethernet ACP exiting...
and the subsequent ?con off tc:? hangs up for several minutes before
timing out:
con off tc:
CON -- Command execution error.
Timeout on unit quieting operation
OFFLINETC0:
unl if:/vec
I?m running M+ 4.6 on an emulated 11/93 with DECnet enabled. Up until
the shutdown everything appeared to be running - I was able to
successfully telnet into the system. Let me know if you need any more
information.
John.
On Dec 29, 2015, at 9:12 PM, Johnny Billquist
<bqt at softjar.se
<mailto:bqt at softjar.se>> wrote:
John, I've rewritten that part now. It no longer asks for the number
of terminals at IPGEN. Instead you have a new logical name,
TELNET$TERMINALS, for which you have a prototype in the IPAPPL.NEW
file, that you can copy. This logical name now controls how many
terminals are created.
Could you (or someone else) test and report if I got anything wrong in
the installation procedure?
Johnny
On 2015-12-24 03:01, John Forecast wrote:
Johnny,
I installed this version of your code and had a problem with
TELNETD. Because I had changed the number of supported terminals (from
10 to 4) I got
INS -- Length mismatch common block TELCOM
while trying to install TELNETD. Looks like you?ll need to rebuild it as
part of the install.
John.
On Dec 18, 2015, at 11:52 PM, Johnny Billquist <bqt at softjar.se
<mailto:bqt at softjar.se>
<mailto:bqt at softjar.se>> wrote:
>
> Well, about two months since my last announcement, and some
> improvements have been done, so I figured I should do another one.
>
> I've cut a new release of TCP/IP for RSX, and I encourage everyone to
> update to this latest release.
>
> A short list of changes since my last release:
>
> TCP:
> . Performance improvements. TCP timers have been redesigned for better
> performance. This gave FTP a performance increase of about 15$.
> . TCP negative ACK detection has been improved.
> , TCP receive packet handling have been redesigned for better
> performance, and better code structure.
> . Added guards against data received after FIN.
> . Bugfix in SPOOF hostname printouts when filter was cleared.
> . Bugfix in tcp timers that could cause a close to take a very
> long time to clean up.
>
> FTP:
> . Bugfix in user verification code which could cause program
> to crash. This affected ftpd.
> . Changed ftp and ftpd to create files without max record length when
> dealing with binary files.
>
> TELNET:
> . Added exit handler to telnetd, so that telnetd cannot be aborted
> while active sessions exist.
>
> HTTPD:
> . Improved webserver handling of binary files.
>
> As usual, the distribution is available from:
> ftp://mim.update.uu.se/bqtcp.dsk
> ftp://mim.update.uu.se/bqtcp.tap
> ftp://ftp.update.uu.se/pub/pdp11/rsx/tcpip/tcpip.dsk
>
> The documentation is also available through ftp on Mim, or also at
> http://mim.update.uu.se/tcpipdoc
>
> Note! I've realized that BQTCP/IP do not work right if you have a
> PDP-11/74 with multiple processors online. I'll fix that at some point,
> as it's probably just a case of affinity not being set on devices, nor
> relevant processes. This might only be a problem with telnet in fact.
> I know for sure that the IP and TCP drivers works ok in multiprocessor
> systems.
>
> Johnny
>
> --
> Johnny Billquist || "I'm on a bus
> || on a psychedelic trip
> email: bqt at softjar.se || Reading murder books
> pdp is alive! || tryin' to stay hip" - B. Idol
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se <mailto:bqt at softjar.se> || Reading
murder books
pdp is alive! || tryin' to stay hip" - B. Idol