27 Mar
2020
27 Mar
'20
1:06 a.m.
On 3/26/20 7:57 PM, Supratim Sanyal wrote:
I have obtained a MicroVAX 3100-80 with a Storageworks
pizza box, a
CD-ROM drive, a tape drive, some cables and no monitor.
It powers on, does not smoke or explode. The 8 LEDs at the back settle
down to all on except 2 and 3 counting from zero on the right. I can
hear a hard disk spin up.
The cables include two MMJs. I have a PC with a 9-pin female serial
connector. It runs Linux.
The first two of many questions: does the ?0? connector connect to the
console? What exactly do I need to do to connect the PC?s serial port to
the MMJ cable? Note: I have passable soldering skills.
Next question will be about the BNC connector and networking. One thing
at a time.
Very cool! Those are wonderful systems.
The console is on port 3. Connect it to your Linux box via the
appropriate chain of adapters. If you don't get any output, insert a
null modem into the mix and try again.
(Yes, I know the DTE/DCE rules. The above approach is by far the
quickest way to get something talking if you know it's only doing 2/3/7
anyway.)
Here are some
pictures:?https://photos.app.goo.gl/KduorZEimMQ73bMdA
Beautiful!
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA