15 Jan
2016
15 Jan
'16
2:26 p.m.
On 2016-01-15 14:13, hvlems at zonnet.nl wrote:
It's easy for me to say, I've got an area for
my own and have control over my routers. All nodes are level 1 routers, because I like the
SHOW NET command (/NET for v7 systems and later).
Whatever the solution, it will require work on several machines.
If you only have one area 2 router, then nothing in the rest of HECnet
will change anything for you anyway. What you do inside the area have no
effect outside, and vice versa.
Johnny
Verzonden vanaf mijn BlackBerry 10-smartphone.
Origineel bericht
Van: Johnny Billquist
Verzonden: vrijdag 15 januari 2016 13:52
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] Network topology according to MIM.
On 2016-01-15 09:35, hvlems at zonnet.nl wrote:
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
It would probably be better to rethink the
mapping of areas across the globe. The problems seem to arise when one area has nodes on
different continents, e.g. in both Europe and the USA.
That is part of the problem, yes.
More specifically, from any one point, there is only one path that is
used to get to that area, even if the area have several area routers.
Which, in the case of an area spread out, means that your packets might
travel a very long way somewhere, to get somewhere close.
Having multiple area routers do not change this. And maybe that is what
is confusing people, if they think that by just having one area router
at each site would solve this. It does not.
All this said, though, there isn't much traffic on HECnet, so I do not
loose any sleep over it. :-)
Johnny
Verzonden vanaf mijn BlackBerry 10-smartphone.
Origineel bericht
Van: Robert Armstrong
Verzonden: vrijdag 15 januari 2016 06:30
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: RE: [HECnet] Network topology according to MIM.
That HECnet works is not really that much of a
trick.
I wouldn't agree, but the issues I'm thinking of are not technical. Try getting
everyone to agree on a cost structure, for example.
Bob