[HECnet] LATCP confusion

Cool, that worked. But I'm still stuck :) What I'm trying to do is to attach a PPP service to this port, and then be able to connect to that from my DECserver. I've set up the PPP service: TCPIP SET INTERFACE PP1 /SERIAL_DEVICE=LTA777: /HOST=192.168.77.246 - /NETWORK_MASK=255.255.255.0 /DESTINATION=192.168.77.151 /COMPRESS=AUTO But doing a SET HOST/LAT CHIMPYNET does not work - any ideas where I'm going wrong? Some output: CHIMPYSYS$ lcp show service chimpynet Service Name: CHIMPYNET Service Type: Application Service Status: Available Connections: Enabled Service Password: Disabled Queueing: Enabled Service Ident: CHIMPY - OpenVMS 8.3 on AlphaServer 800 5/333 Service Ports: _LTA777: Node Name Status Rating Identification CHIMPY On 28 D CHIMPY - OpenVMS 8.3 on AlphaServer 800 5/333 CHIMPYSYS$ lcp show port lta777 Local Port Name: _LTA777: Local Port Type: Dedicated (Queued) Local Port State: Inactive Connected Link: Target Port Name: Actual Port Name: Target Node Name: Actual Node Name: Target Service Name: CHIMPYNET Actual Service Name: CHIMPYSYS$ set host/lat chimpynet %LAT-F-CONFAIL, connection to CHIMPYNET not established -LAT-F-LRJINUSE, port or service in use -LAT-I-END, control returned to node CHIMPY On 4 Oct 2009, at 20:50, Kari Uusim ki wrote: Sampsa Laine wrote: Guys, I'm trying to set up an incoming LAT service on CHIMPY called SAMPSACOM, i.e. I want to be able to connect to a service called SAMPSACOM over LAT and this connection is then routed to port LTA101: - I will have an app on CHIMPY that waits for connections on LTA101. I've done this: lcp:==mcr latcp lcp create port lta101: /dedicated lcp set port lta101: /dedicated /service=sampsacom Now what? If I try to connect to the port (via set host/dte) I get an error: %REM-E-PORTRXERR, port receive error -SYSTEM-F-HANGUP, data set hang-up It doesn't show up in SHOW SERVICES and SHOW PORTS says it's inactive: $lcp show ports * [....] _LTA101: Dedicated Inactive //SAMPSACOM Any help on how to proceed would be most welcome. Sampsa . First you should create the service $ MC LATCP CREA SERVI /APPL Then create the port $ MC LATCP CREA PORT /DEDI And then associate the port with your service $ MC LATCP SET PORT /DEDI /SERVI Then start your application which listens to the LAT port. Kari