22 Aug
2020
22 Aug
'20
1:23 p.m.
I think you assumed he has a Cisco router :-)
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-
hecnet at Update.UU.SE] On Behalf Of Johnny Billquist
Sent: Saturday, 22 August 2020 9:22 PM
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Configuring py-decnet.
Hi, Thord.
The RSX manuals are probably partially usable, but there are certainly
some significant differences in how this works in RSX and RSTS/E as well.
I noticed that you have phase III manuals for RSTS/E V7 on bitsavers.
They might be partially helpful as well? (I suspect you already know these.)
About your setup. Not sure why you have pydecnet there between the
virtual tap ethernet and real ethernet. Is it implicit that you have two
pydecnet instances in there, with some distance between them? Because
from the delqa you can get to the physical ethernet, and if your Cisco
is on that same ethernet, then I'd say pydecnet is not needed.
Johnny
On 2020-08-22 12:29, Thord Nilson wrote:
Hello all!
I am trying to test up decnet iv on a rsts/e 10.1 system on simh and
hopefully connect to hecnet. Currently borrowing a node name/number
from
Peter L.
Is the following setup workable/suitable?
rsts/e --> delqua --> virtual tap ethernet --> pydecnet -->
real-ethernet --> GRE tunnel.
Anyone who has done this and willing to share the setup used?
Or any good links?
I have not found a decnet-iv manual for rsts/e online, but maybe the rsx
manuals are usable. Anyone know?
Best regards,
Thord.
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol