[HECnet] How do I get a DS10's onboard NIC into 100 mbps mode?

Fast translates as 100 Mb/s half duplex and you wouldn't want that. Auto is not always sufficient. There are two auto modes, auto negotiate and auto sensing. IMHO the latter is better avoided. ------Origineel bericht------ Van: Oleg Safiullin Afzender: owner-hecnet at Update.UU.SE Aan: hecnet at Update.UU.SE Beantwoorden: hecnet at Update.UU.SE Onderwerp: Re: [HECnet] How do I get a DS10's onboard NIC into 100 mbps mode? Verzonden: 28 september 2011 08:31 Use "set ewb0_mode fast" or "set ewb0_mode auto" SRM command. Sampsa Laine wrote: I just looked at CHIMPY's network device and noticed it's in 10 mbps mode. --- snip --- $ show dev ewb0/full Device EWB0:, device type DE500, is online, network device, error logging is enabled, device is a template only. Error count 2 Operations completed 0 Owner process "" Owner UIC [SYSTEM] Owner process ID 00000000 Dev Prot S:RWPL,O:RWPL,G,W Reference count 0 Default buffer size 512 Operating characteristics: Link up. Speed (Mbits/sec) 10 Def. MAC addr 08-00-2B-87-5B-87 Current MAC addr AA-00-04-00-91-21 -- snip -- I thought they support 100 mbps as well? How do I turn that on? It's currently connected to a Gbps switch. Sampsa