On 11/15/18 9:19 AM, Tim Sneddon wrote:
I have just finished doing a bit of network cleanup on
my ASA and 1841
and noticed that a number of the HECnet GRE tunnels seems to be down or
possibly misconfigured.
I know that my IP address changed a while back as part of the transition
to Australia's National Broadband Network (NBN) and my router can now be
found at 110.141.227.104. I am pretty sure that Brian sent out an
update, but I'm not sure how well it was applied.
Since changing IP addresses I've only been able to establish a tunnel
with?50.131.218.138 (area 42).? However, when I attempt to ping the
other end I am unable to reach 42.1023.
After looking at my firewall logs I noticed that someone
at?81.135.164.245 was attempting to establish a GRE tunnel.? After
looking at the existing configuration I noticed that it was a similar
address to what had been last configured for area 22.? I made the change
and now I can establish a link to area 22 and I can successfully ping
22.1023.
However, that is were it ends.? I have tunnels configured for area 59,
23, 61, 9 and 52, but I have no connection to the other end.? Worse, I
have no connection to the HECnet as a larger entity.
Is anyone else other than myself and Mark Darvill still using the
tunnels?? If there is a lack of interest in the maintenance, I would be
happy to take it over and start running the bridge here too.
The GRE tunnel system is in use here at the LSSM, area 61. I just
updated your endpoint address in my router. I've not seen any updates
from Brian that changed your tunnel endpoint address.
I can ping 42.1023, but not 22.1023. Most of my routes go through
42.1022.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA