[HECnet] PyDECnet setup

Stick it where? What does line 2 look like afterwards ? From: owner-hecnet at Update.UU.SE <owner-hecnet at Update.UU.SE> On Behalf Of Supratim Sanyal Sent: Wednesday, November 17, 2021 3:26 PM To: hecnet at Update.UU.SE Subject: Re: [HECnet] PyDECnet setup Hey Brian, Also stick this into line 2 - this is Paul's magic solution to big transfers like copy all nodes from MIM to something behind A52RTR. nsp --qmax=5 On 11/17/21 9:06 AM, Paul Koning wrote: You have both http and https enabled (both are enabled by default) so it will try to bind ports 8000 and 8443. paul On Nov 17, 2021, at 8:09 AM, Brian Hechinger <wonko at 4amlunch.net <mailto:wonko at 4amlunch.net> > wrote: Oops, I knew I forgot something. Trying to rush the email out. router.conf: system --identification "PyDECnet, A52RTR - Quarteira, Portugal" routing 52.1023 --type l2router logging console @nodes.conf circuit mul-29-2 Multinet --mode connect --destination 82.70.71.174 --dest-port 9608 --cost 4 --t3 180 #circuit eth-0 Ethernet internal --mode pcap --cost 1 http.conf: http --api --insecure-api -brian On 17/11/21 13:06, Wilm Boerhout wrote: Config file please ? From: owner-hecnet at Update.UU.SE <mailto:owner-hecnet at Update.UU.SE> <mailto:owner-hecnet at Update.UU.SE> <owner-hecnet at Update.UU.SE> On Behalf Of Brian Hechinger Sent: Wednesday, November 17, 2021 2:02 PM To: hecnet at Update.UU.SE <mailto:hecnet at Update.UU.SE> Subject: [HECnet] PyDECnet setup That other thread is getting out of hand so I'll start a new one. I've started getting this error: Exception in thread https: Traceback (most recent call last): File "/usr/lib/python3.8/threading.py", line 932, in _bootstrap_inner self.run() File "/usr/lib/python3.8/threading.py", line 870, in run self._target(*self._args, **self._kwargs) File "/usr/local/lib/python3.8/dist-packages/decnet-1.0.592-py3.8.egg/decnet/http.py", line 103, in serverstart httpd = DECnetMonitor (server_addr, DECnetMonitorRequest, File "/usr/local/lib/python3.8/dist-packages/decnet-1.0.592-py3.8.egg/decnet/http.py", line 126, in __init__ self.socket = source_addr.create_server () File "/usr/local/lib/python3.8/dist-packages/decnet-1.0.592-py3.8.egg/decnet/host.py", line 399, in create_server sock = self.bind_socket (self.listen_family) File "/usr/local/lib/python3.8/dist-packages/decnet-1.0.592-py3.8.egg/decnet/host.py", line 387, in bind_socket sock.bind (self.sockaddr) OSError: [Errno 98] Address already in use Neither lsof nor netstat show that port in use. Doesn't matter if I use the default 8000 or set something different, I get that every time. I didn't always though. This was running fine before I tried adding the circuit for ethernet access. Thoughts? -brian --