[HECnet] Area 61 node list

-----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Johnny Billquist Sent: Monday, April 30, 2012 15:54 To: hecnet at Update.UU.SE Subject: Re: [HECnet] Area 61 node list On 2012-04-30 21:46, Johnny Billquist wrote: On 2012-04-30 21:38, Dave McGuire wrote: Here is my current node list. AXPEE is up 24/7. Last night I finished unloaded a truck full of stuff from my old house, including lots of VAXen, so there will likely be some more coming up soon. Node Name System ------------------------------------------------------------------ 61.1 GW Cisco 7206VXR, IOS 12.3 61.2 AXPEE DS10L, 466MHz, 1GB, 120GB, VMS 8.3 61.3 EBOLA VAX 4000/700A, 128MB, 4GB, VMS 7.3 61.4 MECCA PDP-11/53, RSTS/E v10.1 61.5 FANG PDP-11/70, RSTS/E v10.1 61.50 RA Linux Gothca. Another file you might want to look at, if you prefer, would be MIM::US:[DECNET]NODENAMES.DAT. The format should be obvious if you check either that, or FIX.CMD By the way, I hope you know that VMS can copy the nodename database directly from another machine without you having to hack files on your own, if that is the reason why you asked for a file... Assuming you are running Phase IV, just do: "MCR NCP COPY KNOWN NODES FROM MIM TO BOTH" and you are set. replace MIM with 1.13, if you don't have MIM in your database already. Johnny -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol Be careful using "MCR NCP COPY KNOWN NODES FROM MIM TO BOTH". If you have a cluster you may delete important records. -Steve