24 Sep
2013
24 Sep
'13
1:37 a.m.
I have no idea how to set up GRE, but I believe the DECbrouter I have can do it, does
anyone have any pointers on how to set it up? I will also want to add GRE to my user mode
router when I get chance, but for DEC Legacy using the brouter might be nice. Once I can
get it (the brouter) working let me know how to update your db with the IP address.
Question though, does the IP address change have to be made manually or could it be
automatic?
Thanks
Rob
On 22 September 2013 23:32, Brian Hechinger <wonko at 4amlunch.net> wrote:
If you want to use the GRE tunnels I can give you access to the db to update your IP.
-brian
On Sep 22, 2013, at 16:18, "Robert Jarratt" <robert.jarratt at
ntlworld.com> wrote:
I don't have multinet and I have never installed
it. What protocol does it
use under the covers, is it something proprietary to multinet? Could I get
the DECbrouter I bought recently to interoperate with your side? If it is
not too hard I could try implementing Multinet interop in my user mode
router.
Regards
Rob
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf
Of Steve Davidson
Sent: 22 September 2013 11:43
To: hecnet at Update.UU.SE
Subject: RE: [HECnet] Connecting to HECnet from DEC Legacy 19-20 Oct
If you decide to use Multinet and have access to a dynamic DNS name, then I
can link SG1:: to it via the SW at this end. It is completely automated.
If we can manage to install Multinet on GORVAX:: then the links would be
even faster.
-Steve
_____
From: owner-hecnet at Update.UU.SE on behalf of Mark Wickens
Sent: Sat 9/21/2013 16:18
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Connecting to HECnet from DEC Legacy 19-20 Oct
On 21/09/2013 21:12, Robert Jarratt wrote:
I am hoping to connect to HECnet from the DEC Legacy event in October,
hopefully connecting a few interesting systems to HECnet and allowing
attendees to explore HECnet.
I would be using a USB 3G device to do this, so I wouldn't know my IP until
the day itself. Is there anyone with a bridge on HECnet who would be
available during UK daytime on those days to configure their bridge to peer
with me? There may be more than one change of IP address over the course of
the weekend though.
Are there any other options?
Thanks
Rob
Rob,
Obviously I will have my home bridge going, so maybe we can keep this
in-house with a bit of experimentation? I think this is maybe what I did
last time, I really can't remember but it makes a lot of sense and it does
shake my memory a bit!
Mark.
<winmail.dat>