[HECnet] two dumb RSX questions

On 12/27/2013 04:16 AM, goran ahling wrote: As I remember the SYSGEN/NETGEN task, the controller intended for DECnet should NOT be taken into SYSGEN at all, but later, at the totally separate task of performing NETGEN once Your OS. is up and running, it should be included there. So, no need to redo your SYSGEN when playing with different Ethernet cards. Ahh, excellent. Thank you. I've run into a snag, though. I'm trying to allow sysgen to autoconfigure the hardware via ACF, and it hangs on my 11/24 system. I've tried with both 4.3 and 4.6. Thinking it might have something to do with my recently-installed and untested DELUA, I removed it, but I get the same result. So I completed sysgens via manual hardware configuration entry, both with and without the DELUA. Both sysgen runs completed successfully, but the system hangs when I try to boot the new executive. The hardware is, as far as I can tell, otherwise fine. I built the system up from parts a few weeks ago, and have exercised it with RT-11. Everything seems ok. The baseline RSX system boots just fine. I've set up an identically-configured instance of simh, and run through the same process on that, and it works. My next step is to pull it out of the rack and triple check things like the memory boards' CSRs and such, etc., but I thought I'd ask here first. I last ran an RSX sysgen almost thirty years ago, and I barely remember it at all...but I'm certain nothing like this happened. That was on an 11/34 with RL01s, RL02s, and RK07s. Any thoughts? -Dave -- Dave McGuire, AK4HZ New Kensington, PA