[HECnet] Node 4.249

On Tue, Aug 28, 2012 at 3:30 PM, Rob Jarratt <robert.jarratt at ntlworld.com> wrote: The problem stopped around the time of your first email, so I guess you fixed it. My user mode router is not reporting adjacency up and down any more. Regards Rob -----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Mark Wickens Sent: 28 August 2012 17:08 To: hecnet at update.uu.se Subject: Re: [HECnet] Node 4.249 I'm not totally clear on your setup. You have two interfaces, eth0 and eth2. I think I got that. And the bridge program is using eth0 for it's bridge. But how does your ethernet looks like? Is both eth0 and eth2 connected to the same physical network? Is the router on that same segment as well? Both interfaces are on the same segment as the router. What sessions are you seeing on the router? On the router I see the following sessions: ---------------------------------------------------------------------------- --- Private IP :Port #Pseudo Port Peer IP :Port Ifno Status ---------------------------------------------------------------------------- --- 192.168.1.126 4711 4711 130.238.19.25 4711 3 0 192.168.1.127 4711 4711 130.238.19.25 4711 3 0 Where 192.168.1.126 is eth0 and 192.168.1.127 is eth2 And what did the routing table on the machine running the bridge look like, if you have two interfaces? No idea on this one. The bridge program does not try to do anything clever with the UDP packets, so they will be sent on any interface, based on your routing table. It might sound as if your router/NAT was pointing at the IP address of eth0, but the default entry of the routing table on your machine would be using eth2. But this is all wild guessing right now... OK, that probably explains it. I thought the bridge was tied to that particular interface. It's worth pointing out that what I'm doing it probably daft - the 2nd card was installed to use for a SIMH instance, so I should probably de- configure it from an OS point of view. Hello! Funny you should mention that reason behind that card, Mark, I had plans utilizing that idea, but I shelved them for the moment, when I realized that there would be a big problem. Namely the fact that my DSL device is getting on in years, and I'm not all sure what would happen when I tried any of that. Next: Rob you've mentioned several times a user mode router. Presumably for Decnet issues of course. When will it become an available option and on what platforms? ----- Gregg C Levine gregg.drwho8 at gmail.com "This signature fought the Time Wars, time and again."