[HECnet] DMC11 in next simh version... looks nice, and question about TOPS-10

On Wed, 02 Jan 2013 22:33:33 +0100, you wrote: Now the question. It seems the DMC11 device is supported in the KS10 emulation. Could it be posible to use it to DECNETize (and HECNETize) TOPS-10 over simh? I have not been able to find the docs to install DECNET-10 in a 7.04 monitor... Any TOPS-10 hacker around? :) Well, I've done my TOPS-10 7.04 install (plus TSU patch tapes that upgraded it to 7.05), but I've done it on KLH10 (KL10 emulation) with Ethernet support, so things may be somewhat different. At the time I chose KLH10 right because my goal was to have a DECnet-10 node and that appeared (or was?) the only way. Starting with 7.04 (or maybe even 7.03), DECnet sources are bundled with Monitor sources and to have DECnet you just have to build a DECnet-enabled custom Monitor (which you should build anyway). At boot time everything starts automatically: the Monitor calls KNILDR.EXE to load microcode into the Ethernet and then starts DECnet network service (with help by Galaxy, except for FAL streams that are started by OPR). There is a DECnet-10 tape, but it mostly contains software for front-end based DECnet solutions (KL10 only), e.g. PDP-11s in disguise called DN20s and the like. The only useful file from the DECnet tape is NML.EXE which can be found elsewhere too. Anyway, the DECnet tape is BB-X116C-BB and is available on Trailing Edge; there is also a newer BB-X116D-BB, which is somewhat hidden, but can be located using the search by filename function... :P The DECnet-10 manual I'm reading (AA-L413B-TB) says that DECnet starts at boot time without intervention, whatever the interface used (but front-ends have to be loaded). So, in your KS10 + DMC11 configuration all is needed seems to be a DECnet-enabled Monitor with the right pieces to speak to that hardware. The Software Installation Guide lists a bunch of MONGEN questions related to DECnet on KS10s, asking for KMC/DUP or DMR hardware characteristics. A quick Google search seems to confirm that both KMC and DMR are very similar to DMC and software compatible with it. DMR should be a DMC enhancement/replacement. Look for the following in Bitsavers (/dec/pdp10/TOPS10_softwareNotebooks/): /vol20/AA-P379B-TB_TOPS-10_DECnet_and_PSI_Installation_Guide_Apr86.pdf /vol20/AA-L413B-TB_DECnet_and_PSI_System_Managers_and_Operators_Guide_Apr86.pdf The most updated software installation guide can be found here: http://pdp-10.trailing-edge.com/tops10v704_docc/01/10,7/docupd/sig.mem.html HTH, :) G.