[HECnet] Issues With Virtual Cisco Tunnels and HECnet

On 2013-01-10 04:29, Cory Smelosky wrote: Hello, all! Dave and I have been attempting to establish a link between us using dynamips on my end, and real cisco gear on his end and we've hit some issues. The GRE tunnel comes up fine, I can ping DECnet nodes on his end, and I can set host to nodes in his area. It is also possible for nodes in his area to reach nodes in my area so packets are indeed getting /somewhere/. However! Despite this tunnel being identical to the other tunnels, I am unable to reach the rest of HECnet via the tunnel to him. Here's the output of SHOW DECNET ROUTE: --- marianne#sh decnet route Area Cost Hops Next Hop to Node Expires Prio *1 16 3 Tunnel0 -> 61.1 *2 16 3 Tunnel0 -> 61.1 *3 19 4 Tunnel0 -> 61.1 *4 16 3 Tunnel0 -> 61.1 *5 16 3 Tunnel0 -> 61.1 *6 16 3 Tunnel0 -> 61.1 *7 18 4 Tunnel0 -> 61.1 *8 16 3 Tunnel0 -> 61.1 *9 0 0 (Local) -> 9.1023 *11 16 3 Tunnel0 -> 61.1 *12 16 3 Tunnel0 -> 61.1 *18 17 4 Tunnel0 -> 61.1 *19 16 3 Tunnel0 -> 61.1 *20 17 4 Tunnel0 -> 61.1 *28 16 3 Tunnel0 -> 61.1 *33 17 4 Tunnel0 -> 61.1 *42 15 2 Tunnel0 -> 61.1 *44 16 3 Tunnel0 -> 61.1 *47 18 4 Tunnel0 -> 61.1 *51 18 4 Tunnel0 -> 61.1 *52 15 2 Tunnel0 -> 61.1 *59 15 2 Tunnel0 -> 61.1 --- And ping: --- marianne#ping 61.1 Type escape sequence to abort. Sending 5, 100-byte DECnet echos to atg 0 area.node 61.1, timeout is 5 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 40/56/76 ms marianne#ping 61.3 Type escape sequence to abort. Sending 5, 100-byte DECnet echos to atg 0 area.node 61.3, timeout is 5 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 44/56/68 ms marianne#ping 1.13 Type escape sequence to abort. Sending 5, 100-byte DECnet echos to atg 0 area.node 1.13, timeout is 5 seconds: ..... Success rate is 0 percent (0/5) --- My tunnel config: --- interface Tunnel0 description Tunnel to HECnet (Dave) no ip address decnet cost 5 tunnel source Ethernet1/0 tunnel destination <his ip> tunnel path-mtu-discovery --- Ethernet1/0: --- interface Ethernet1/0 ip address 10.10.10.99 255.255.255.0 no ip route-cache duplex full decnet cost 10 --- Overall DECnet config: --- decnet routing 9.1023 decnet node-type area --- His end has other functioning links, and his tunnel to me is the inverse. Any ideas? I hope 61.1 is an area router... Johnny -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol