6 Jun
2019
6 Jun
'19
9:18 p.m.
If you have my TCP/IP installed, and you have generated DECnet with the
Multinet lines, then things should be pretty easy. MNC might not be
installed, but MNC.TSK should be in [IP], so just install it then.
However, do you really have all your DECnet machines on separate
ethernets? Otherwise I would really recommend that you have DECnet on
your local ethernet, and just have one machine which is the router to
the outside from the ethernet segment. Individual point-to-point links
will not be as efficient as the ethernet.
Johnny
On 2019-06-06 21:09, Kurt Hamm wrote:
New issue.? I am working to setup my (Oscar) PiDP-11
on HECNet
(Decnet).? The docs say that I need to run MNC to setup the links for
DECNet, but I can't find that application anywhere.? I am assuming that,
for the PiDP-11,?NETGEN ?and IPNET have been completed.? I just need to
configure my circuits and make sure the PiDP-11 has the correct area.node.
RSX-11M+ newbie, so sorry if I am missing something basic.
Kurt
On Thu, Jun 6, 2019 at 2:53 PM Johnny Billquist <bqt at softjar.se
<mailto:bqt at softjar.se>> wrote:
On 2019-06-06 15:04, Kurt Hamm wrote:
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
I wasn't sure where to post this question, so
I thought I would
start here.
I have two simh vax3900 machines.? Larry and Moe.? Larry is the
HECNet
router for Moe.
When I send email from Larry (via SMTP), the _return _email
address is
correct (SYSTEM at LARRY.MYDOMAIN.COM
<mailto:SYSTEM at LARRY.MYDOMAIN.COM> <mailto:SYSTEM at LARRY.MYDOMAIN.COM
<mailto:SYSTEM at LARRY.MYDOMAIN.COM>>.
When I send email from Moe (to LARRY::SMTP%"user at domain.com
<mailto:user at domain.com>
<mailto:user at domain.com <mailto:user at
domain.com>>"), the return
email address is:
SYSTEM at SCSSYSTEMID.MYDOMAIN.COM
<mailto:SYSTEM at SCSSYSTEMID.MYDOMAIN.COM>
<mailto:SYSTEM at SCSSYSTEMID.MYDOMAIN.COM
<mailto:SYSTEM at SCSSYSTEMID.MYDOMAIN.COM>>.
Why is Moe using the SCSSYSTEMID instead of the system name?
*I am missing something.*
I'm not sure how you should do a setup of mail relaying in VMS.
However, you can always send from Moe to MIM::user at domain.com
<mailto:MIM%3A%3Auser at domain.com>. Those
mails should then get correct addresses.
? ?Johnny
--
Johnny Billquist? ? ? ? ? ? ? ? ? || "I'm on a bus
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?||? on a psychedelic trip
email: bqt at softjar.se <mailto:bqt at softjar.se>? ? ? ? ? ? ?||
Reading murder books
pdp is alive!? ? ? ? ? ? ? ? ? ? ?||? tryin' to stay hip" - B. Idol