2 Jan
2015
2 Jan
'15
2:28 p.m.
Thanks Johnny,
I did look via the web on MIM, there definitely seems to be an issue somewhere in-between
as it seems as though I am exchanging L2 Hellos OK.
Ian are you online, have you got adjacency and can you connect elsewhere?
Anyone else any ideas?
Thanks, Mark
On 2 Jan 2015, at 12:34, Johnny Billquist <bqt at softjar.se> wrote:
Hmm. Looking from MIM (you know, you could do this yourself as well), it seems as if area
22 would be reachable. Next hop is HUB:: (42.1022).
However, I HUB:: is a Cisco, so I cannot extract any information from it.
I tried talking to 22.10, but no success. I don't know what the problem is. Hard to
diagnose.
I tried several places that goes through HUB:: but cannot find any I can talk to.
I also tried some nodes that runs through DIMMA::, and they work fine.
(Both HUB:: and DIMMA:: are Cisco boxes).
So it's not a generic problem with the Ciscos, but something more specific to HUB:: I
suspect.
Johnny
On 2015-01-02 11:16, Mark Darvill wrote:
HI,
I have been playing with my cisco router and a SIMH Vax over the break.
from my router I can see the following neighbours
cmrtr01#show decnet nei
Net Node Interface MAC address Flags
0 12.1023 Tunnel57 0000.0000.0000 A
0 42.1022 Tunnel51 0000.0000.0000 A
0 61.1023 Tunnel53 0000.0000.0000 A
0 22.10 FastEthernet0/1 aa00.0400.0a58 V
and the following routes
cmrtr01#show decnet route
Area Cost Hops Next Hop to Node Expires
Prio
*1 50 2 Tunnel51 -> 42.1022
*2 52 4 Tunnel51 -> 42.1022
*3 51 3 Tunnel51 -> 42.1022
*7 50 2 Tunnel51 -> 42.1022
*8 50 2 Tunnel51 -> 42.1022
*9 40 2 Tunnel57 -> 12.1023
*11 50 2 Tunnel51 -> 42.1022
*12 20 1 Tunnel57 -> 12.1023
44 64 A+
*18 51 3 Tunnel51 -> 42.1022
*19 50 2 Tunnel51 -> 42.1022
*22 0 0 (Local) -> 22.100
*23 40 2 Tunnel53 -> 61.1023
*28 50 2 Tunnel51 -> 42.1022
*33 51 3 Tunnel51 -> 42.1022
*39 51 3 Tunnel51 -> 42.1022
*42 20 1 Tunnel51 -> 42.1022
45 64 A+
*47 50 2 Tunnel51 -> 42.1022
*59 50 2 Tunnel51 -> 42.1022
*61 20 1 Tunnel53 -> 61.1023
38 64 A+
Node Cost Hops Next Hop to Node Expires
Prio
*(Area) 0 0 (Local) -> 22.100
*22.10 4 1 FastEthernet0/1 -> 22.10 33
64 V
*22.100 0 0 (Local) -> 22.100
My SIMH Vax can see my router and has an adjacency. My node is 22.10 and
router 22.100
Can anyone see area 22 as I don t seem to be able to communicate elsewhere.
Thanks, Mark
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic
trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" -
B. Idol