[HECnet] DECnet-Plus on Tru64

On 13 Feb 2013, at 00:14, Cory Smelosky <b4 at gewt.net> wrote: On 13 Feb 2013, at 00:10, Kari Uusim ki <uusimaki at exdecfinland.org> wrote: If you have registered and loaded the licenses successfully, but still DECnet-OSI won't start, you might have too few license units for the system type. Can you tell a bit more about your system and the licenses you are trying to use. THat would be helpful. On 13.2.2013 6:50, Cory Smelosky wrote: On 12 Feb 2013, at 23:46, Kari Uusim ki <uusimaki at exdecfinland.org> wrote: You are not trying to use VMS licenses on Tru64unix, are you? They aren't compatible, unfortunately. You need real Tru64 licenses. I am using Tru64 licenses...I just don't know the license names I need...the documentation seems to not be fond of saying... Kari On 13.2.2013 4:56, Cory Smelosky wrote: Hello! I'm been playing with Tru64 and I managed to get DECnet installed...some common library files referred to DECNET-OSI-END and DECNET-OSI-EXT, are these the correct licenses, or need I load others? NCL continues to complain despite having those licenses loaded. Any help appreciated... . . REASON: DECnet License Failure Description: There is a problem with the DECnet License Reason = License Not Installed bash-4.0# /usr/sbin/lmf list Product Status Users: Total Active DECNET-OSI-END active unlimited DECNET-OSI-EXT active unlimited Both have UNITS set to 0. The shell script that told me these is as follows: if lmfck DECNET-OSI-EXT DEC 1.0 8-FEB-1993 then EXTENDED_LICENSE="yes" else if lmfck DECNET-OSI-END DEC 1.0 8-FEB-1993 then END_SYSTEM_LICENSE="yes" else Found the problem. Producer was set to something other than DEC. Oops...