1 Jan
2016
1 Jan
'16
9:50 p.m.
I just tried adding ?.ifact telnet abo telnet? to IPREM and there was no delay during
shutdown.
John.
On Jan 1, 2016, at 2:47 PM, Johnny Billquist <bqt
at softjar.se> wrote:
Hi.
The turning off of TCP/IP is a big kludgy, and do not properly handle if there are active
connections.
I would, in general, recommend that you just leave TCP/IP alone, and it will stop when
the system halts.
One day I'll get around to "fix" that part, but it's a low priority
thing.
If you want it to shut down cleanly, you need to check with NETSTAT/ALL, and the list
needs to be totally empty before you run IPREM.
Johnny
On 2016-01-01 19:28, John Forecast wrote:
Johnny,
Thanks for fixing the TELNETD configuration issue, it?s working
fine now. I have one additional problem during shutdown when IPREM is
called from lb:[1,2]shutup.cmd I get the following error:
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol ifc stop
Stopping IP.
Stopping UD.
TC not running..
abo ethacp
TCP/IP - ethernet ACP exiting...
and the subsequent ?con off tc:? hangs up for several minutes before
timing out:
con off tc:
CON -- Command execution error.
Timeout on unit quieting operation
OFFLINETC0:
unl if:/vec
I?m running M+ 4.6 on an emulated 11/93 with DECnet enabled. Up until
the shutdown everything appeared to be running - I was able to
successfully telnet into the system. Let me know if you need any more
information.
John.
On Dec 29, 2015, at 9:12 PM, Johnny Billquist
<bqt at softjar.se
<mailto:bqt at softjar.se>> wrote:
John, I've rewritten that part now. It no longer asks for the number
of terminals at IPGEN. Instead you have a new logical name,
TELNET$TERMINALS, for which you have a prototype in the IPAPPL.NEW
file, that you can copy. This logical name now controls how many
terminals are created.
Could you (or someone else) test and report if I got anything wrong in
the installation procedure?
Johnny
On 2015-12-24 03:01, John Forecast wrote:
Johnny,
I installed this version of your code and had a problem with
TELNETD. Because I had changed the number of supported terminals (from
10 to 4) I got
INS -- Length mismatch common block TELCOM
while trying to install TELNETD. Looks like you?ll need to rebuild it as
part of the install.
John.
On Dec 18, 2015, at 11:52 PM, Johnny Billquist <bqt at softjar.se
<mailto:bqt at softjar.se>
<mailto:bqt at softjar.se>> wrote:
>
> Well, about two months since my last announcement, and some
> improvements have been done, so I figured I should do another one.
>
> I've cut a new release of TCP/IP for RSX, and I encourage everyone to
> update to this latest release.
>
> A short list of changes since my last release:
>
> TCP:
> . Performance improvements. TCP timers have been redesigned for better
> performance. This gave FTP a performance increase of about 15$.
> . TCP negative ACK detection has been improved.
> , TCP receive packet handling have been redesigned for better
> performance, and better code structure.
> . Added guards against data received after FIN.
> . Bugfix in SPOOF hostname printouts when filter was cleared.
> . Bugfix in tcp timers that could cause a close to take a very
> long time to clean up.
>
> FTP:
> . Bugfix in user verification code which could cause program
> to crash. This affected ftpd.
> . Changed ftp and ftpd to create files without max record length when
> dealing with binary files.
>
> TELNET:
> . Added exit handler to telnetd, so that telnetd cannot be aborted
> while active sessions exist.
>
> HTTPD:
> . Improved webserver handling of binary files.
>
> As usual, the distribution is available from:
> ftp://mim.update.uu.se/bqtcp.dsk
> ftp://mim.update.uu.se/bqtcp.tap
> ftp://ftp.update.uu.se/pub/pdp11/rsx/tcpip/tcpip.dsk
>
> The documentation is also available through ftp on Mim, or also at
> http://mim.update.uu.se/tcpipdoc
>
> Note! I've realized that BQTCP/IP do not work right if you have a
> PDP-11/74 with multiple processors online. I'll fix that at some point,
> as it's probably just a case of affinity not being set on devices, nor
> relevant processes. This might only be a problem with telnet in fact.
> I know for sure that the IP and TCP drivers works ok in multiprocessor
> systems.
>
> Johnny
>
> --
> Johnny Billquist || "I'm on a bus
> || on a psychedelic trip
> email: bqt at softjar.se || Reading murder books
> pdp is alive! || tryin' to stay hip" - B. Idol
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se <mailto:bqt at softjar.se> || Reading
murder books
pdp is alive! || tryin' to stay hip" - B. Idol