17 Nov
2021
17 Nov
'21
3:26 p.m.
I think so. It will obviously fail later on, but it looks like the bind happens before it
realizes that it has no cert. If you don't want https, add --https-port 0.
I suppose I should force that if no cert is specified, that would be logical.
paul
On Nov 17, 2021, at 9:23 AM, Brian Hechinger <wonko
at 4amlunch.net> wrote:
Even without a cert specified?
-brian
On 17/11/21 14:06, Paul Koning wrote:
> You have both http and https enabled (both are enabled by default) so it will try to
bind ports 8000 and 8443.
>
> paul
>
>> On Nov 17, 2021, at 8:09 AM, Brian Hechinger <wonko at 4amlunch.net
<mailto:wonko at 4amlunch.net>> wrote:
>>
>> Oops, I knew I forgot something. Trying to rush the email out.
>>
>> router.conf:
>>
>> system --identification "PyDECnet, A52RTR - Quarteira, Portugal"
>> routing 52.1023 --type l2router
>> logging console
>> @nodes.conf
>> circuit mul-29-2 Multinet --mode connect --destination 82.70.71.174 --dest-port
9608 --cost 4 --t3 180
>> #circuit eth-0 Ethernet internal --mode pcap --cost 1
>>
>> http.conf:
>>
>> http --api --insecure-api
>>
>> -brian
>>
>> On 17/11/21 13:06, Wilm Boerhout wrote:
>>> Config file please ?
>>>
>>> From: owner-hecnet at Update.UU.SE <mailto:owner-hecnet at
Update.UU.SE> <owner-hecnet at Update.UU.SE> <mailto:owner-hecnet at
Update.UU.SE> On Behalf Of Brian Hechinger
>>> Sent: Wednesday, November 17, 2021 2:02 PM
>>> To: hecnet at Update.UU.SE <mailto:hecnet at Update.UU.SE>
>>> Subject: [HECnet] PyDECnet setup
>>>
>>> That other thread is getting out of hand so I'll start a new one.
>>>
>>> I've started getting this error:
>>>
>>> Exception in thread https:
>>> Traceback (most recent call last):
>>> File "/usr/lib/python3.8/threading.py", line 932, in
_bootstrap_inner
>>> self.run()
>>> File "/usr/lib/python3.8/threading.py", line 870, in run
>>> self._target(*self._args, **self._kwargs)
>>> File
"/usr/local/lib/python3.8/dist-packages/decnet-1.0.592-py3.8.egg/decnet/http.py",
line 103, in serverstart
>>> httpd = DECnetMonitor (server_addr, DECnetMonitorRequest,
>>> File
"/usr/local/lib/python3.8/dist-packages/decnet-1.0.592-py3.8.egg/decnet/http.py",
line 126, in __init__
>>> self.socket = source_addr.create_server ()
>>> File
"/usr/local/lib/python3.8/dist-packages/decnet-1.0.592-py3.8.egg/decnet/host.py",
line 399, in create_server
>>> sock = self.bind_socket (self.listen_family)
>>> File
"/usr/local/lib/python3.8/dist-packages/decnet-1.0.592-py3.8.egg/decnet/host.py",
line 387, in bind_socket
>>> sock.bind (self.sockaddr)
>>> OSError: [Errno 98] Address already in use
>>>
>>> Neither lsof nor netstat show that port in use. Doesn't matter if I use
the default 8000 or set something different, I get that every time.
>>>
>>> I didn't always though. This was running fine before I tried adding the
circuit for ethernet access.
>>>
>>> Thoughts?
>>>
>>> -brian
>>>
>