[Simh] [HECnet] TOPS20 4.1 DECnet Progress

On 10-May-13 13:25, Robert Jarratt wrote: -----Original Message----- From: Cory Smelosky [mailto:b4 at gewt.net] Sent: 10 May 2013 07:28 To: Robert Jarratt Cc: simh; hecnet Subject: Re: [HECnet] TOPS20 4.1 DECnet Progress On Wed, 8 May 2013, Robert Jarratt wrote: Making progress: $OPR OPR>ENTER NCP NCP>SHOW STATUS KNOWN LINES NCP> 22:25:11 NCP request # 2 [SHOW STATUS KNOWN LINES] Status as of 8-May-2013 22:25:12 Line ID State Adjacent Node KDP_0_0 On KDP_0_1 On Function completed successfully NCP> J Regards Rob I wonder if it would be possible to apply what you've done with TOPS-20 to TOPS-10. Once I get it working on TOPS-20 then we can try TOPS-10. My own efforts to install DECnet on TOPS-10 have not gone well so far though, it fails to link after MONGEN. Regards Rob Assuming you follow the installation guide and that there's no version skew, any version of TOPS-10 that supports DECnet should build and run out of the box. If you provide the specific version & tape images, commands used and all output, we can advise. Do note that if you are using any unsupported/customer supported modules (e.g. the DMR driver), they need to be obtained from the 'customer supported' tape/directory and added to the build files. This communication may not represent my employer's views, if any, on the matters discussed. _______________________________________________ Simh mailing list Simh at trailing-edge.com http://mailman.trailing-edge.com/mailman/listinfo/simh