31 Jan
2022
31 Jan
'22
6:49 p.m.
I think you're probably right, but I have had some experience that maybe
indicates otherwise. Possibly.
When I was working on my extended mode FTP server, I used a string
instruction (MOVLJ) to move some data between sections. Since I was
moving a rather large 256KW buffer, it made sense to do this instead of
sitting in an ILDB/IDPB loop (assuming I couldn't win big with an XBLT).
The eventual goal was to do some automatic nice things by using a
translate table to compute parity via an MOVST with different size bytes.
It worked fine under KLH10 yet when I ran it on a Toad, it blew up.
What I mean is that parts of the address space got destroyed. For days
I couldn't figure it out. Finally, I signed on to a real KL and
executed the same code, which worked. This indicated a bug in the XKL
firmware, which R. Gorin acknowledge. Had it not worked on the KL, the
problem would have been in either the KLH10 micro-engine or my code.
Perhaps this is the exception that proves the rule?
On 1/31/22 2:14 AM, Johnny Billquist wrote:
I agree that it would be nice to confirm that this
works in real
hardware, but I also find it unlikely that it wouldn't.
While DEC was not perfect, I would expect that they actually had
tested this before releasing the software.
Johnny
On 2022-01-31 01:51, R. Voorhorst wrote:
@Dave:
It would only be worth the time and energy to prove if current
Decnet11MP in
combination with KG11 would work in a Dup to Dup or Dmc connection,
which in
hardware take a serious effort.
In virtual reality it is far more easy to arrange such things.
Unless I cannot find a bug quickly enough, then it could be helpful to
request you to check on it.
Thanks though for the time being.
Reindert
-----Original Message-----
From: Dave McGuire [mailto:mcguire@neurotica.com]
Sent: Sunday, 30 January, 2022 18:25
To: The Hobbyist DECnet mailing list <hecnet(a)lists.dfupdate.se>
Subject: [HECnet] Re: KG11 emulation probably defective -->diagnostic
ZKGAB0
for KG11 runs without complaints.
On 1/30/22 12:21 PM, Mark Pizzolato - Info Comm wrote:
On Sunday, January 30, 2022 at 5:34 AM, Reindert
wrote:
> The diagnostics in XXDP for KG11 completes without problems, so
> far, so
good.
> It limits the scope to interface problems
between Decnet11MP and Simh
KG11.
We really don't know how robust the diagnostic is and if it exercises
the same details that are used by the DDCMP implementation.
You could run the DDCMP case with KG11 debugging enabled and
identify what
it is doing precisely and then go back and see if the diagnostic is
doing
the same stuff...
I have a KG11-A board; if it would be helpful, I can install it in a
PDP-11 at LSSM perhaps this week.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
_______________________________________________
HECnet mailing list -- hecnet(a)lists.dfupdate.se To unsubscribe send
an email
to hecnet-leave(a)lists.dfupdate.se
_______________________________________________
HECnet mailing list -- hecnet(a)lists.dfupdate.se
To unsubscribe send an email to hecnet-leave(a)lists.dfupdate.se