26 Oct
2025
26 Oct
'25
10:07 p.m.
Oh. Another thing. Does LCP SHO COU on the RSX system show anything
interesting?
Johnny
On 2025-10-26 22:02, Johnny Billquist wrote:
By the way - you say that it's onlt that one
server that you have
problems with? Do the various commands on the Lantronix looks the same
as for the other ones where you don't have the problems?
Johnny
On 2025-10-26 22:00, Johnny Billquist wrote:
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt(a)softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
Hmm. One more thing then.
LCP SHO PORT when you are connected?
But yeah, all looks good here. Might need to go and dissect LAT
packets on the ethernet. Gah! I hate that. It's quite a chore...
Johnny
On 2025-10-26 19:35, Dave McGuire wrote:
On 10/26/25 03:31, Johnny Billquist wrote:
Dave. Apart from packet dumps, could you get the
following:
Packet dumps will take a few days but we will get them.
Output from LCP SHO CHA on the RSX system.
Node name = /LSSMFT/
Node identification = //
Service name = /LSSMFT/
Service identification = /LSSM RSX-11M-PLUSPDP-11/53/
Group codes 0
Multicast timer = 20 Maximum buffers = 3
Receive timeout = 30 Retransmit timer = 3
Terminals = 16
LAT Version = 5.1 LAT Protocol is active
Output from SHOW PORT on the Lantronix
Here is one port where this happens, but it happens from all that
we've tried, including telnetting into the Lantronix and connecting
from there.
Port 17: Username: mcguire Physical Port 17 (Local Mode)
Char Size/Stop Bits: 8/1 Input Speed:
9600
Flow Ctrl: Xon/Xoff Output Speed:
9600
Parity: None Modem Control: None
Access: Dynamic Local Switch:
None
Backward: None Port Name:
VT330
Break Ctrl: Local Session
Limit: 4
Forward: None Terminal Type:
Soft()
Autostart char(s): --/-- Datasend char(s):
--/--
Save chars (AS/DS): none/none Timer:
(none)
Preferred Services: (Lat)
(Telnet)
Authorized Groups : 0
(Current) Groups : 0
Characteristics: Autoprompt Broadcast Loss Notify Verify
Remote Conf TelnetPad
Output from SHOW SYSTEM on Lantronix.
I believe that would be SHOW SERVER. This line-wrapped a lot.
ETS32PR Version V3.6/8(010807) Uptime: 9 Days
16:39
Hardware Addr: 00-80-a3-24-98-7a Name/Nodenum: ETS-2/ 0
Ident String: Middle Console Cluster
LAT Circuit Timer (msec): 80 Password
Limit: 3
Inactive Timer (min): 30 Console
Port: 1
Queue Limit: 32 Retrans
Limit: 25
Keepalive Timer (sec): 20 Session
Limit: 4
Multicast Timer (sec): 30 Node/Host Limits: 50/20
TCP/IP Address: 192.168.0.199 Subnet Mask: 255.255.255.0
Nameserver: 192.168.0.108 Backup
Nameserver: 192.168.0.1
TCP/IP Gateway: 192.168.0.2 Backup Gateway: 192.168.0.37
Domain Name: LSSMUSEUM.ORG IP Time: Daytime
TCP Keepalives: Enabled
DHCP Server: None Lease Time: 0:00
Prompt: Local_%n%P> Network
Buffering: 4096
Groups: 0
Characteristics: Announce Broadcast Lock
Incoming Logins: LAT Telnet (No Passwords Required)
Output from SHOW KNOWN SERVICES on Lantronix.
There's no "KNOWN" but here's "SHOW SERVICES":
ASC20 Available Welcome to LSSM SC40 Tops20,
TOPS-20 Mon
CL7830 Unavailable MODCOMP Classic7830 console
CRAYEL Available Cray YMP-EL console
DEC7000 Available DEC7000 console
DECNET Available Linux3.5.0-17-generic
ETS-1 Available Front Terminal Cluster
ETS-2 Available Middle Console Cluster
ETS-3 Available Front Console Cluster
ETS-5 Available ETS Terminal Server
G4490XT Available Genicom 4490XT
HSC90 Available HSC90 console
IBMAEA1 Available IBM3174 AEA1
IBMAEA2 Available IBM3174 AEA2
IPSCFE Available InteliPSC front end
LA100 Available LA100 printing terminal
LSSMFT 1 Connected LSSM RSX-11M-PLUS PDP-11/53
MICROVAXII Available MicroVAX-II console
MODCOMP1 Available MODCOMP interactive BAT001
MODCOMP2 Available MODCOMP interactive BAT002
PARSYTECFE Available Parsytec Supercluster frontend
PDP1105 Available PDP-11/05 console
PDP1134 Available PDP-11/34 console
PDP1144 Available PDP-11/44 console
PDP1153 2 Connected PDP-11/53 console
PDP1170 Available PDP-11/70 console
PDP11T55 Available PDP-11/T55 console
PLATTER Available Linux 6.8.0-86-generic
SC40 Available Systems Concepts SC-40 console
SGIO2K Available SGI Origin-2000 console
SGIO3K Available SGI Origin-3000 console
SPXG Available Welcome to OpenVMS (TM) VAX
Operating S
SUN3280 Available Sun-3/280 console
SUN4690MP Available Sun-4/690MP console
TANIA Available OpenVMS/IA64
TEK4014 Unavailable Tektronix 4014 terminal
VAX11750 Available VAX-11/750 console
VAX4705A Available VAX-4000/705A console
VAX6400 Available VAX-6400 console
VAX7000 Available VAX-7000 console
VAX8250 Available VAX-8250 console
And here's "SHOW SERVICE LSSMFT CHA":
Service: LSSMFT Ident: LSSM RSX-11M-PLUS PDP-11/53
Rating: 1
Enabled Groups: 0
And if the Lantronix use different commands, I
hope you can figure
out what the equivalent commands would be.
They are substantially similar to the DECserver firmware.
And also, if connected (as in RSX shows the port
as connected), the
output from DEV TTn: on RSX, where TTn: is whatever terminal is
indicated as connected.
LCP shows it as connected, as TT2: "dev tt2:" says:
TT2: Not logged in
CLI = MCR BUF = 80. HFILL = 0
LINES = 24. TERM =unknown OWNER = none
NOPRINTER_PORT NOPASTHRU NOSERIAL
LOWER NOPRIV NOHOLD NOSLAVE NOESC NOCRT NOFORM
REMOTE
ECHO NOVFILL NOHHT NOFDX WRAP NORPA NOEBC
TYPEAHEAD
NOCTRLC NOAVO NOANSI NODEC NOEDIT NOREGIS
NOSOFT NOBLKMOD
HSYNC BRO NOABAUD TTSYNC
You could also try a BRO TTn: FOOBAR, to see if
output to the port
works.
This waits awhile and says "BRO -- Message failed to reach TT2:"
-Dave