[HECnet] RSTS/E under simh

El 15/05/2014, a les 23.14, Cory Smelosky <b4 at gewt.net> va escriure: First I need to find the exact size of the drive so I can set an RAUSER to it. I can then install RSTS/E *IF* I can get SIMH to boot and install from the RSTS/E V10.1 tape (which I can't get it to do). Are you getting weird "invalid block size" messages? If so, check: - Your CPU type is 11/73 (I'm pretty sure other options will work, but not, for instance, 11/70) - Make sure you have set your tape drive to READ ONLY (set TS0 LOCK) - Use the TS device. I'm right now repeating the install to check it just works. Looking at the monitor building progress bar ... It worked Memory available to RSTS/E is 2044K words. Re-creating CRASH.SYS file with minimum size of 1316 blocks 4 devices disabled Proceed with system startup? <YES> Beginning RSTS/E system startup... 15-May-14 11:20 PM Installing monitor overlays 15-May-14 11:20 PM Mounting disks 15-May-14 11:20 PM Assigning logical names 15-May-14 11:20 PM Starting error logging 15-May-14 11:20 PM Setting system characteristics 15-May-14 11:20 PM Installing run-time systems and libraries 15-May-14 11:20 PM Starting Operator/Message Services OMS V10.1-A 15-May-14 11:20 PM <<<<<<<<<<<<<<< Message 1 from OMS, user [1,2], Detached, job 3 Starting Operator/Message Services 15-May-14 11:20 PM Setting terminal characteristics 15-May-14 11:20 PM Defining system commands 15-May-14 11:20 PM Setting printer characteristics 15-May-14 11:20 PM Starting spoolers *** From [1,2] "[ 1, 2]" on KB0: at 11:20 PM 15-May-14 ** RSTS/E is on the air... OMS V10.1-A 15-May-14 11:20 PM <<<<<<<<<<<<<<< Message 2 from user [1,2] on _KB0:, job 2 The system startup is complete Jordi Guillaumes i Pons jg at jordi.guillaumes.name HECnet: BITXOV::JGUILLAUMES