[HECnet] Getting a virtual cluster connected

I'll do it :) {RHESUS$} type mim::decnet.txt The hobbyist DECnet project arealist. Area 1 Johnny Billquist Area 2 Robert Armstrong Area 3 Patrick Caulfield Area 4 Mark Wickens Area 5 Rob Jarratt Area 6 Mark Benson Area 7 Jordi Guillaumes i Pons Area 8 Sampsa Laine Area 9 Cory Smelosky Area 10 Jean-Yves Bernier Area 11 Saku Setala Area 12 Tim Sneddon Area 13 Reserved for DECserver management Area 15 James Sharp Area 16 Kari Uusim i Area 18 Ryan Blair Area 19 Steve Davidson Area 20 Joe Ferraro Area 21 Brian Schenkenberger Area 26 Thierry Dussuet Area 27 Mark Berryman Area 28 Erik Olofsen Area 32 Reserved for "special" events - available for short term use only Area 33 Fred Coffey Area 42 Sridhar Ayengar Area 44 Hans Vlems Area 47 Sampsa Laine Area 51 Dan Williams Area 52 Brian Hechinger Area 53 Phil Mendelsohn Area 54 Tore Sinding Bekkedal Area 56 Allison Area 57 G an ling Area 59 Peter L hberg Area 60 Zane Healy Area 61 Dave McGuire Area 62 Oleg Safiullin Area 63 Reserved for hidden area testing On 26 Dec 2012, at 02:28, Cory Smelosky <b4 at gewt.net> wrote: On 25 Dec 2012, at 19:26, "Steve Davidson" <jeep at scshome.net> wrote: MIM::DU4:DECNET.TXT I need to have a link up first to connect that way. ;) I'll go telnet to mim and grab it from there. -Steve -----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Cory Smelosky Sent: Tuesday, December 25, 2012 7:19 PM To: hecnet at Update.UU.SE Subject: Re: [HECnet] Getting a virtual cluster connected On 25 Dec 2012, at 19:17, "Steve Davidson" <jeep at scshome.net> wrote: As long as areas are available go for one! SG1::'s Multinet Tunnel Address is bridge.declab.net:700. I've forgotten which areas are available. ;) -Steve -----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Cory Smelosky Sent: Tuesday, December 25, 2012 6:53 PM To: hecnet at Update.UU.SE Subject: Re: [HECnet] Getting a virtual cluster connected On 25 Dec 2012, at 18:50, "Steve Davidson" <jeep at scshome.net> wrote: Connect to SG1:: on the East Coast as the primary, LEGATO:: on the West Coast as the secondary. What are the IPs for those? I'll connect a random node on another friend's server while i'm at it (extranet.wilcox-tech.com is the host for it. It's static) That doesn't need it's own area though, can I piggyback off someone else's? ;) -Steve -----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Cory Smelosky Sent: Tuesday, December 25, 2012 2:06 PM To: hecnet at Update.UU.SE Subject: [HECnet] Getting a virtual cluster connected Hello everyone! I've decided to bring up the random virtual cluster I was running on a friend's server, and I want to get it connected to HECnet. ;) The IP is static so connecting it should be easier, the server is in North Carolina. It's looking like i'll need to go install multinet on one of the cluster members as that'll be easier than bringing up a linux VM to run Johnny''s bridge. ;) What areas are available? I'll go renumber to one of the free areas...once I either remember or reset the SYSTEM password. Thanks. -- Cory Smelosky http://gewt.net/ Personal stuff! http://gimme-sympathy.org/ My permanently-a-work-in-progress pet project. -- Cory Smelosky http://gewt.net/ Personal stuff! http://gimme-sympathy.org/ My permanently-a-work-in-progress pet project. -- Cory Smelosky http://gewt.net/ Personal stuff! http://gimme-sympathy.org/ My permanently-a-work-in-progress pet project.