[HECnet] Who was doing that HECnet mapping work?

-----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Mark Wickens Sent: 07 April 2013 08:58 To: hecnet at Update.UU.SE Subject: Re: [HECnet] Who was doing that HECnet mapping work? On 07/04/2013 00:31, Rob Jarratt wrote: What version of VMS are you running on the two machines you tried it from? Thanks Rob From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Mark Wickens Sent: 07 April 2013 00:13 To: hecnet at Update.UU.SE Subject: Re: [HECnet] Who was doing that HECnet mapping work? On 06/04/2013 23:54, Rob Jarratt wrote: NCP TELL A5RTR SHOW KNOWN CIRCUITS Had more success from SIMVAX: $ MCR NCP TELL A5RTR SHOW KNOWN CIRCUITS Known Circuit Volatile Summary as of 6-APR-2013 22:48:15 Circuit State Loopback Adjacent Name Routing Node eth2 on 5.8 psilo.update.uu.seon 1.13 psilo.update.uu.seon 1.15 psilo.update.uu.seon 62.637 psilo.update.uu.seon 59.11 psilo.update.uu.seon 42.1022 psilo.update.uu.seon 14.1 psilo.update.uu.seon 8.400 psilo.update.uu.seon 4.248 psilo.update.uu.seon 44.1023 psilo.update.uu.seon 19.41 psilo.update.uu.seon 28.41 psilo.update.uu.seon 47.556 psilo.update.uu.seon 11.2 psilo.update.uu.seon 2.1 Command completed. Regards, Mark. Hi Rob, The VAX (SIMH, successful run) is running OpenVMS 7.3, the Alpha (first run) is running OpenVMS 8.3 Regards, Mark. Interesting. I think the other person who failed also runs OVMS 8.3, so it looks like more modern OSs can't connect. I don't have 8.3, any chance you could let me have a guest account on your 8.3 machine so I can test? Thanks Rob