[HECnet] Joining HECNET

On 1 Feb 2013, at 16:27, Johnny Billquist <bqt at softjar.se> wrote: On 2013-02-01 22:22, Cory Smelosky wrote: On 1 Feb 2013, at 16:21, Johnny Billquist <bqt at softjar.se> wrote: Steve, since Wolfgang indicated he wanted to run an endnode, you'll have to decide the area. Am I the only one that thinks an area dedicated to just endnodes is a good idea? Probably, since that would be impossible. An area needs atleast one area router... Or are you saying that you think we should set up one area for people who only want to run endnodes? That seems like going over the river to get water. I was thinking more like that, yes. I see your point though, maybe save that for when we're running out of areas. Then everyone who wants to run an endnode needs to connect to some specific endpoint. And what for? There are absolutely no problems with having just an endnode anywhere. That would get rather difficult, I see. And since you need to have an area router, what is the problem of using an existing area router. Preferrably one close to you, and then just place your endnode in that area. I am totally missing the point here, in which it seems people think that endnodes are somehow difficult. They are the simplest of DECnet nodes. Johnny Johnny On 2013-02-01 22:11, Steve Davidson wrote: Send me the following information (offline): Your physical location: country at a minimum - this determines which Multinet router you will connect to External dynamic - DNS name - this will be resolved every x number of minutes to maintain your link DECnet area - this is used for naming the Multinet circuits email address to send updates to (both external and internal (<node>::<username>)) -Steve ________________________________ From: owner-hecnet at Update.UU.SE on behalf of Wolfgang Eichberger Sent: Fri 2/1/2013 02:30 To: Johnny Billquist Cc: hecnet at update.uu.se Subject: Re: [HECnet] Joining HECNET Now as things settled I am back with my SimH/Vax (running 24/7 on a raspberry pi) and my Alpha (an Alphastation 255 I newly aquired). There are Decstations in Storage too (these odd MIPS Boxes) - maybe one of these could be connected too - provided there's DECNet Support in Ultrix. There is. You just need to find the distribution. Nice. I should have approbiate media and will give this a try. You need to figure out who to connect to first, then we can fix the node numbers. I have a terribly short memory. Who was it that could handle Multinet with dynamic IP? Steve? Care to help out? Also, Wolfgang, do you want to set a level 1 router, or do you just epxect all your machines to be endnodes, and have each on have their own link? My memory isn't best too, so don't worry ;) Primary intention is to bring up at least the simulated VAX 24/7. The other machines would run on occasional basis. As my DecNET experience is way too rusty best practice would be operating the simulated VAX as Endnode for start. It'd be greatly appreciated if Steve could help out with the Dynamic IP.... Regards, Wolfgang