10 Nov
2021
10 Nov
'21
2:52 a.m.
Well, I did post the patch a 'awhile' ago...? Meaning, I don't
remember!? You should also check your Tops-10 system date, just in case
it thinks differently.? What's the node name?
VENTI:: is offline, so I hope our patch didn't take it out of commission...
Tops-20 does not have the COM911 issue, so no complaints are what you'd
expect.? I don't have any, but I'll take a peek at my error log later
just to see what might be sneaking in there.
On 11/9/21 6:28 PM, R. Voorhorst wrote:
L.S.
Decnet still running here without bugs on 5 tops10 and one 4 Tops20 of which
1 is a Panda and 3 are even Tops20 V4.1.
So have to check the code if repairs were already in place a long time ago
...
Best regards,
Reindert
-----Original Message-----
From:owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf
Of Paul Koning
Sent: Monday, 08 November, 2021 15:23
To:hecnet at update.uu.se
Subject: Re: [HECnet] TOPS-10 D-Day, DECnet failure on November 9th is less
than six days away
On Nov 7, 2021, at 7:03 PM, Thomas
DeBellis<tommytimesharing at gmail.com>
wrote:
Ugh, the larger ones all made a racket, even an
11/05 in a rack. An 11/40
really did, particularly did because you had sit close
to it to use the
GT40. I don't remember an 8/E being that bad.
But 10's and 20's? Ouch. The machine
room at Marlboro that I used had a
pile of KL's, KI's and a KA in it.
2116, 2012, 2136, 1031 come to mind, but
there had to be three times that list. What a racket.
One of the nice features of CDC mainframes (the 60 bit machines) is that
they were rather quiet. That's because the mainframe was liquid cooled,
with water cooling of the refrigeration machinery. Only external boxes like
the console and outboard peripheral controllers had cooling fans. The
machines I worked on had the disk drives in another room (one floor down)
which put all that noise away from the operators. Being able to talk to
your colleagues without shouting was quite nice.
paul