17 Nov
2021
17 Nov
'21
3:43 p.m.
I think he meant after line 2. that gets its own line.
On 17/11/21 14:42, Wilm Boerhout wrote:
Stick it where? What does line 2 look like afterwards ?
*From:* owner-hecnet at Update.UU.SE <owner-hecnet at Update.UU.SE> *On
Behalf Of *Supratim Sanyal
*Sent:* Wednesday, November 17, 2021 3:26 PM
*To:* hecnet at Update.UU.SE
*Subject:* Re: [HECnet] PyDECnet setup
Hey Brian,
Also stick this into line 2 - this is Paul's magic solution to big
transfers like copy all nodes from MIM to something behind A52RTR.
nsp --qmax=5
On 11/17/21 9:06 AM, Paul Koning wrote:
You have both http and https enabled (both are enabled by default)
so it will try to bind ports 8000 and 8443.
paul
On Nov 17, 2021, at 8:09 AM, Brian Hechinger
<wonko at 4amlunch.net> wrote:
Oops, I knew I forgot something. Trying to rush the email out.
router.conf:
system --identification "PyDECnet, A52RTR - Quarteira, Portugal"
routing 52.1023 --type l2router
logging console
@nodes.conf
circuit mul-29-2 Multinet --mode connect --destination
82.70.71.174 --dest-port 9608 --cost 4 --t3 180
#circuit eth-0 Ethernet internal --mode pcap --cost 1
http.conf:
http --api --insecure-api
-brian
On 17/11/21 13:06, Wilm Boerhout wrote:
Config file please ?
*From:*owner-hecnet at Update.UU.SE<owner-hecnet at Update.UU.SE>
<mailto:owner-hecnet at Update.UU.SE>*On Behalf Of*Brian
Hechinger
*Sent:*Wednesday, November 17, 2021 2:02 PM
*To:*hecnet at Update.UU.SE
*Subject:*[HECnet] PyDECnet setup
That other thread is getting out of hand so I'll start a
new one.
I've started getting this error:
Exception in thread https:
Traceback (most recent call last):
?File "/usr/lib/python3.8/threading.py", line 932, in
_bootstrap_inner
???self.run()
?File "/usr/lib/python3.8/threading.py", line 870, in run
???self._target(*self._args, **self._kwargs)
?File
"/usr/local/lib/python3.8/dist-packages/decnet-1.0.592-py3.8.egg/decnet/http.py",
line 103, in serverstart
???httpd = DECnetMonitor (server_addr, DECnetMonitorRequest,
?File
"/usr/local/lib/python3.8/dist-packages/decnet-1.0.592-py3.8.egg/decnet/http.py",
line 126, in __init__
???self.socket = source_addr.create_server ()
?File
"/usr/local/lib/python3.8/dist-packages/decnet-1.0.592-py3.8.egg/decnet/host.py",
line 399, in create_server
???sock = self.bind_socket (self.listen_family)
?File
"/usr/local/lib/python3.8/dist-packages/decnet-1.0.592-py3.8.egg/decnet/host.py",
line 387, in bind_socket
???sock.bind (self.sockaddr)
OSError: [Errno 98] Address already in use
Neither lsof nor netstat show that port in use. Doesn't
matter if I use the default 8000 or set something
different, I get that every time.
I didn't always though. This was running fine before I
tried adding the circuit for ethernet access.
Thoughts?
-brian
--