25 Sep
2022
25 Sep
'22
2:03 p.m.
On 2022-09-25 13:54, Supratim Sanyal wrote:
Oh! Wow. Other end of spectrum. I don't remember ever touching that.
Earliest VMS I ever played with was 3.7, if I remember right. Also never
used Phase II. Earliest was Phase III. Did Phase II even support more
than 43 nodes? I guess I should check some. :-)
Johnny
On Sep 25, 2022, at 5:44 AM, Johnny Billquist
<bqt(a)softjar.se> wrote:
Uh... Do you have Phase V installed?
Hehe - It’s VAX VMS 2.0 running DECnet 1.3 which I think is phase II
based on the gunkies post at
https://gunkies.org/wiki/Installing,_Configuring,_and_Testing_DECnet_V1.3_o…
<https://gunkies.org/wiki/Installing,_Configuring,_and_Testing_DECnet_V1.3_on_VMS_V2.0>
Is the person who wrote this in this list?
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt(a)softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
Johnny
On 2022-09-25 03:19, Supratim Sanyal wrote:
_______________________________________________
HECnet mailing list -- hecnet(a)lists.dfupdate.se
To unsubscribe send an email to hecnet-leave(a)lists.dfupdate.se On 9/24/22 10:18 AM, Johnny Billquist wrote:
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt(a)softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
_______________________________________________
HECnet mailing list -- hecnet(a)lists.dfupdate.se
To unsubscribe send an email to hecnet-leave(a)lists.dfupdate.se Try to give more information in the command
instead of going through
some interactive more where you answer every question?
DEFINE NODE NAME XX ADD 43
DECnet/VAX 1.3 NCP is very different. There was a
"AA-H803C-TE
DECnet-VAX System Manager's Guide" that I cannot find a PDF of in the
usual places. Is it trying to log in to itself using some account
that does not exist? UAF has nothing other than SYSTEM, FIELD,
SYSTEST AND DEFAULT.
I have DECnet/Python on the other side of the DDCMP link.
$ SET DEF <SYSEXE>
$ MCR SYSGEN
SYSGEN> CONNECT NET/NOADAPTER/DRIVER=NETDRIVER
SYSGEN> EXIT
$ SH SYS
VAX/VMS Processes on 24-SEP-1980 01:08:13.87 Uptime 0
00:01:04
Pid Process Name UIC State Pri Dir. I/O CPU Page flts
Ph.Mem
00010000 NULL 000,000 COM 0 0 00:01:01.22 0 0
00010001 SWAPPER 000,000 HIB 16 0 00:00:00.03 0 0
00010017 ERRFMT 001,006 HIB 8 6 00:00:00.05 29 30
00010018 OPCOM 001,004 LEF 7 2 00:00:00.04 32 36
00010019 JOB_CONTROL 001,004 HIB 9 5 00:00:00.03 33 80
0001001A DRA0ACP 001,003 HIB 8 103 00:00:00.18 64 110
0003001B SYSTEM 001,004 CUR 4 11 00:00:00.64 160 88
$ SH DEV X
List of Devices on 24-SEP-1980 01:08:29.04
Device Device Device Err. Volume Free Trans
Mount
Name Status Characteristics Count Label Blocks
Count Count
XMA0: on line 0
XMB0: on line 0
$ SH DEV N
List of Devices on 24-SEP-1980 01:08:32.58
Device Device Device Err. Volume Free Trans
Mount
Name Status Characteristics Count Label Blocks
Count Count
NLA0: on line 0
NET0: on line 0
$ MCR NCP
NCP>PURGE LOCAL
NCP>PURGE KNOWN REMOTES
%NCP-E-DELERR, error deleting file SYS$SYSTEM:RMTNODE.DAT
-RMS-E-FNF, file not found
NCP>PURGE KNOWN LINES
%NCP-E-DELERR, error deleting file SYS$SYSTEM:LINE.DAT
-RMS-E-FNF, file not found
NCP>PURGE KNOWN OBJECTS
%NCP-E-DELERR, error deleting file SYS$SYSTEM:OBJECT.DAT
-RMS-E-FNF, file not found
NCP>
%NCP-E-BADPARS, unrecognized parameter "_NA"
<SET/ZERO/LOAD/PURGE/LIST/DEFINE/DISCONNECT/LOOP/SHOW/MODIFY/EXIT>:
%NCP-E-BADPARS, unrecognized parameter "_NA"
<SET/ZERO/LOAD/PURGE/LIST/DEFINE/DISCONNECT/LOOP/SHOW/MODIFY/EXIT>:DEFINE
LOCAL NAME XX NUMBER 43 MAXLINKS 200 MAXNODES 128
%NCP-S-RECADD, new database record added
NCP>LIST LOCAL
CONFIGURATION DATABASE LOCAL NODE
LOCAL NODE NAME: XX
LOCAL NODE NUMBER: 43
MAXIMUM NUMBER OF LOGICAL LINKS: 200
MAXIMUM NUMBER OF REMOTE NODES: 128
NCP>
%NCP-E-BADPARS, unrecognized parameter "_NA"
<SET/ZERO/LOAD/PURGE/LIST/DEFINE/DISCONNECT/LOOP/SHOW/MODIFY/EXIT>:
%NCP-E-BADPARS, unrecognized parameter "_NA"
<SET/ZERO/LOAD/PURGE/LIST/DEFINE/DISCONNECT/LOOP/SHOW/MODIFY/EXIT>:DEFINE
OBJECT NAME NICE NUMBER 19 FILE NICE PRIVILEGES DIAGNOSE OPER
%NCP-S-RECADD, new database record added
NCP>DEFINE OBJECT NAME REMACP NUMBER 23 FILE REMACP
%NCP-E-BADPARS, unrecognized parameter ""
PRIVILEGES NEEDED TO ACCESS OBJECT<OPER,DIAGNOSE,LOG_IO,...CMKRNL>:_NA
%NCP-S-RECADD, new database record added
NCP>LIST
<LOCAL/REMOTE/OBJECT/LINE/KNOWN>:OBJECT
OBJECT NAME(1-8 CHARS):NICE
CONFIGURATION DATABASE OBJECT NICE
NETWORK WIDE NUMBER: 19
ASSOCIATED FILE NAME: NICE
ACCESS PRIVILEGES:
DIAGNOSE
OPER
NCP>SET STATE LOCAL ON
Opcom, 01:13:31.97, NETACP Accnt=
Opcom, DECnet starting
%NCP-E-CINREJ, unable to complete network $assign
-SYSTEM-F-INVLOGIN, login information invalid at remote node
NCP>SET STATE LINE DMC11_0 ON
%NCP-E-CINREJ, unable to complete network $assign
-SYSTEM-F-INVLOGIN, login information invalid at remote node
NCP>EXIT
$ TYPE SYSUAF.LIS
Owner Username UIC Account Privs Pri
Default Directory
DEFAULT [200,200] Devour 4 [200,200]
FIELD SERVICE FIELD [001,010] FIELD All 4 [SYSMAINT]
SYSTEM MANAGER SYSTEM [001,004] SYSTEM All 4 [SYSMGR]
SYSTEST-UETP SYSTEST [001,007] SYSTEST All 4 [SYSTEST]
_______________________________________________
HECnet mailing list -- hecnet(a)lists.dfupdate.se
To unsubscribe send an email to hecnet-leave(a)lists.dfupdate.se