17 Nov
2021
17 Nov
'21
3:27 p.m.
Yes, I name them reasonable things so that I don't need to remember
stupid crap like enp0s2 is networkA and enp0s04 is networkB. :-D
-brian
On 17/11/21 14:05, Wilm Boerhout wrote:
I see. It is your privilege to name your network devices ?
So then it must be one of the other lines, most suspect is the
multinet line of course. I have no experience with that, I?m using
DDCMP lines for my point-to-point connections to other areas.
But you say it has worked before? New version? Then we must wait until
Paul finds the time to respond.
*Wilm*
*From:* owner-hecnet at Update.UU.SE <owner-hecnet at Update.UU.SE> *On
Behalf Of *Brian Hechinger
*Sent:* Wednesday, November 17, 2021 2:42 PM
*To:* hecnet at Update.UU.SE
*Subject:* Re: [HECnet] PyDECnet setup
All the processes are stopped. I don't see anything listening on those
ports.
internal is the name of the interface., but that line is commented out
currently because I thought that was the cause (the only thing I added
between it working and it not working) but even commented out that
doesn't seem to have fixed it.
-brian
On 17/11/21 13:31, Wilm Boerhout wrote:
Are you sure all PyDECnet processes are stopped at the point where
you trying to start?
Other thing, where is the internal argument for the ETH-0 circuit
documented? Shouldn?t that be the Linux device name where you run
pcap?
Assuming that the error occurs when you uncomment the ?circuit? line
*Wilm*
*From:* owner-hecnet at Update.UU.SE <owner-hecnet at Update.UU.SE>
<mailto:owner-hecnet at Update.UU.SE> *On Behalf Of *Brian Hechinger
*Sent:* Wednesday, November 17, 2021 2:09 PM
*To:* hecnet at Update.UU.SE
*Subject:* Re: [HECnet] PyDECnet setup
Oops, I knew I forgot something. Trying to rush the email out.
router.conf:
system --identification "PyDECnet, A52RTR - Quarteira, Portugal"
routing 52.1023 --type l2router
logging console
@nodes.conf
circuit mul-29-2 Multinet --mode connect --destination
82.70.71.174 --dest-port 9608 --cost 4 --t3 180
#circuit eth-0 Ethernet internal --mode pcap --cost 1
http.conf:
http --api --insecure-api
-brian
On 17/11/21 13:06, Wilm Boerhout wrote:
Config file please ?
*From:* owner-hecnet at Update.UU.SE <owner-hecnet at Update.UU.SE>
<mailto:owner-hecnet at Update.UU.SE> *On Behalf Of *Brian Hechinger
*Sent:* Wednesday, November 17, 2021 2:02 PM
*To:* hecnet at Update.UU.SE
*Subject:* [HECnet] PyDECnet setup
That other thread is getting out of hand so I'll start a new one.
I've started getting this error:
Exception in thread https:
Traceback (most recent call last):
?File "/usr/lib/python3.8/threading.py", line 932, in
_bootstrap_inner
???self.run()
?File "/usr/lib/python3.8/threading.py", line 870, in run
???self._target(*self._args, **self._kwargs)
?File
"/usr/local/lib/python3.8/dist-packages/decnet-1.0.592-py3.8.egg/decnet/http.py",
line 103, in serverstart
???httpd = DECnetMonitor (server_addr, DECnetMonitorRequest,
?File
"/usr/local/lib/python3.8/dist-packages/decnet-1.0.592-py3.8.egg/decnet/http.py",
line 126, in __init__
???self.socket = source_addr.create_server ()
?File
"/usr/local/lib/python3.8/dist-packages/decnet-1.0.592-py3.8.egg/decnet/host.py",
line 399, in create_server
???sock = self.bind_socket (self.listen_family)
?File
"/usr/local/lib/python3.8/dist-packages/decnet-1.0.592-py3.8.egg/decnet/host.py",
line 387, in bind_socket
???sock.bind (self.sockaddr)
OSError: [Errno 98] Address already in use
Neither lsof nor netstat show that port in use. Doesn't matter
if I use the default 8000 or set something different, I get
that every time.
I didn't always though. This was running fine before I tried
adding the circuit for ethernet access.
Thoughts?
-brian