11 Apr
2023
11 Apr
'23
2:42 a.m.
Obviously, there is no good reason to ask for the circuit information.
You already got all you needed from the show node xx status, right?
Johnny
On 2023-04-11 02:37, Thomas DeBellis wrote:
It sits in a loop doing the following:
show node xxx:: status
From that it picks out the appropriate circuit and does a
show circuit xxx status
So, to show the path from venti2:: to twenex::, the first few commands
would be
NCP>*shoW noDE twenex:: statUS *
Remote Node = 31.29 (TWENEX)
Active Links = 0
Delay = 1
Circuit = NI-0-0
Next Node = 2.1023 (A2RTR)
NCP>*shoW cirCUIT ni-0-0 staTUS *
Circuit State Loopback Adjacent Block
Name Node Size
NI-0-0 On 2.1023 (A2RTR) 591
Designated Router = 2.1023 (A2RTR)
NI-0-0 2.520 (TOMMYT) 1476
NCP>*tell a2rtr:: shoW noDE twenex:: statUS *
Remote Node = 31.29 (TWENEX)
Circuit = DMC-31
Next Node = 31.3 (PYRTR)
NCP>*tell a2rtr:: shoW cirCUIT dmc-31 stATUS *
Circuit = DMC-31
State = On
Adjacent Node = 31.3 (PYRTR)
Block Size = 576
NCP>*telL pyrtr:: shoW noDE twenex:: statUS *
Remote Node = 31.29 (TWENEX)
State = Reachable
Delay = 1
Cost = 24
Hops = 2
Circuit = MUL-31-32
NCP>*telL pyrtr:: shoW cirCUIT mul-31-32 statUS **
*
Circuit = MUL-31-32
Adjacent Node = 31.32 (PIPY)
Block Size = 576
State = On
NCP>*telL pipy:: shOW noDE twenex:: statUS **
*
Remote Node = 31.29 (TWENEX)
State = Reachable
Type = Nonrouting IV
Cost = 4
Hops = 1
Circuit = VDE-31
NCP>*tell pipy:: shoW cirCUIT vde-31 staTUS*
Circuit = VDE-31
Adjacent Node = 31.1022 (AHIMSA)
Block Size = 591
State = On
Adjacent Node = 31.1020 (MOKSHA)
Block Size = 591
Adjacent Node = 31.13 (FEDACH)
Block Size = 1498
Adjacent Node = 31.19 (MACOS9)
Block Size = 1498
Adjacent Node = 31.14 (FOMFOR)
Block Size = 1498
Adjacent Node = 31.26 (W2000S)
Block Size = 1498
Adjacent Node = 31.18 (RAPTOR)
Block Size = 1498
Adjacent Node = 31.21 (WXPEE2)
Block Size = 1498
Adjacent Node = 31.22 (TRU64)
Block Size = 1490
Adjacent Node = 31.20 (WFW311)
Block Size = 1498
Adjacent Node = 31.16 (WEXPEE)
Block Size = 1498
Adjacent Node = 31.11 (CLOUDY)
Block Size = 1498
Adjacent Node = 31.10 (QCOCAL)
Block Size = 1498
Adjacent Node = 31.12 (JUICHI)
Block Size = 576
Adjacent Node = 31.23 (XLVII)
Block Size = 1498
Adjacent Node = 31.24 (TSTVAX)
Block Size = 1498
Adjacent Node = 31.28 (RST101)
Block Size = 598
Adjacent Node = 31.31 (XLIV)
Block Size = 1498
Adjacent Node = 31.33 (XL)
Block Size = 1498
Adjacent Node = 31.34 (NANAJU)
Block Size = 576
Adjacent Node = 31.35 (NJEVX1)
Block Size = 1498
Adjacent Node = 31.36 (NJEVX2)
Block Size = 1498
Adjacent Node = 31.41 (KDJ11E)
Block Size = 576
Adjacent Node = 31.44 (XLVI)
Block Size = 1498
Adjacent Node = 31.39 (ROUT20)
Block Size = 1498
Adjacent Node = 31.38 (LV)
Block Size = 1498
Adjacent Node = 31.15 (OSTARA)
Block Size = 1498
Adjacent Node = 31.30 (VAXSTN)
Block Size = 1498
Adjacent Node = 31.42 (XXXV)
Block Size = 1498
Adjacent Node = 31.1021 (PYDNET)
Block Size = 591
Adjacent Node = 31.27 (MACOS7)
Block Size = 1498
/Adjacent Node = 31.29 (//TWENEX//)//
// Block Size = 576/
------------------------------------------------------------------------
On 4/10/23 6:30 PM, Johnny Billquist wrote:
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt(a)softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
Could you tell in detail which NICE messages you
are generating?
In general, if I were to do such a tool, I would normally do the NICE
message that generates the same request as NCP SHO NOD do.
To give an example from JOCKE to A2RTR:
.ncp sho nod a2rtr
Node summary as of 11-APR-23 00:26:52
Remote Active Next
Node State Links Delay Circuit Node
2.1023 (A2RTR) 1.15 (PONDUS)
.ncp tell pondus sho nod a2rtr
Node summary as of 11-APR-23 00:27:05
Remote Active Next
Node State Links Delay Circuit Node
2.1023 (A2RTR) 1.13 (MIM)
.ncp tell mim sho nod a2rtr
Node summary as of 11-APR-23 00:27:21
Remote Active Next
Node State Links Delay Circuit Node
2.1023 (A2RTR) 31.3 (PYRTR)
.ncp tell pyrtr sho nod a2rtr
Node summary as of 11-APR-23 00:27:30
Remote Active Next
Node State Links Delay Circuit Node
2.1023 (A2RTR)
Sadly PYRTR did not actually tell what the next node is here. Not sure
if it's just an old version of PYRTR, or if there is something for
Paul to improve. But you should get the idea...
Also, note that this will give the forward path, which in DECnet most
certainly might be different than the return path...
Johnny
On 2023-04-10 23:58, Thomas DeBellis wrote:
_______________________________________________
HECnet mailing list -- hecnet(a)lists.dfupdate.se
To unsubscribe send an email to hecnet-leave(a)lists.dfupdate.se Now that I'm done with Kermit-20, I wanted to
get back to finishing
up some other work that I had been doing. FAL, DAP and NFT are in
good enough shape for me to leave them alone for the moment, so
that's another rabbit hole I've gotten myself out of.
I'm now looking fix an error that I somehow introduced into MMAILR
(SMTP over DECnet). Fixing this required modifying DDT, which Ihad
to do to fix another issue I had introduced into Kermit. I wanted to
have a quick look at what Tops-20 hosts might be up on HECnet and
wrote up a little batch job to use NETPTH to test connectivity.
NETPTH is a nifty utility to find paths between DECnet nodes. It
builds a connection the NCU's of various nodes to determine the path
that a message might take to get there. Think of it like traceroute
or ping -R (RECORD_ROUTE option).
It almost never works...
Before I roll up my sleeves and jump into this I was wondering if
anybody had any observations about the errors I'm seeing?
------------------------------------------------------------------------
*TINA*::*PAMINA*::*KLIO*::*TWLGHT*::*RARITY*::*FLUSHY*::*RBDASH*::*APPLEJ*::*PINKIE*::*DISCRD*::*TWENEX*::
From Via Back Thru Cost Hops
VENTI2 (2.522) =>NI-0-0 /BRG-0 <= A2RTR (2.1023)
-1 -1
A2RTR (2.1023) =>DMC-31 /
?NETCFO Can't find Output Circuit parameter
*SAMT20*::
?NETURN Unreachable node
*TOMMYT*::
From Via Back Thru Cost Hops
VENTI2 (2.522) =>NI-0-0 /NI-0-0 <= TOMMYT (2.520)
1 1
*BITXT2*::*BITXT0*::*MINDY*::*FALLON*::*JOSHUA*::*OLAF*::
From Via Back Thru Cost Hops
VENTI2 (2.522) =>NI-0-0 /BRG-0 <= A2RTR (2.1023) -1 -1
A2RTR (2.1023) =>
?NETCFO Can't find Output Circuit parameter
*WALACH*::
From Via Back Thru Cost Hops
VENTI2 (2.522) =>NI-0-0 /BRG-0 <= A2RTR (2.1023)
-1 -1
A2RTR (2.1023) =>DMC-29-206 /
?NETCFO Can't find Output Circuit parameter
*SOL*::
From Via Back Thru Cost Hops
VENTI2 (2.522) =>NI-0-0 /BRG-0 <= A2RTR (2.1023)
-1 -1
A2RTR (2.1023) =>MUL-59-1016 / DMC-1 <= STORTR (59.1016)
-1 -1
STORTR (59.1016) =>GRE-16 /
?NETCFO Can't find Output Circuit parameter
*FENCER*::
From Via Back Thru Cost Hops
VENTI2 (2.522) =>NI-0-0 /BRG-0 <= A2RTR (2.1023)
-1 -1
A2RTR (2.1023) =>MUL-59-1016 / DMC-1 <= STORTR (59.1016)
-1 -1
STORTR (59.1016) =>GRE-16 /
?NETPTH NTMAN failed, reason:
Parameter missing
$
_______________________________________________
HECnet mailing list -- hecnet(a)lists.dfupdate.se
To unsubscribe send an email to hecnet-leave(a)lists.dfupdate.se