[HECnet] Apples MAC OS X pcap library...

In RSX: *help set line SET LINES The SET LINES (abbreviated SE L) command controls the number of screen lines used in either of the screen versions of change mode. Use this option to reduce the time it takes to refresh the screen image when editing on slow terminals. Format: SET LINES n where n is the number of lines to use. n must be between 1 and 22. By default, n is set to 22 lines. If the cursor limits are larger than n-1 they are reduced to n-1. See SET CURSOR. * Johnny Steve Davidson wrote: In EDT execute "set line 60" at the "*" or what ever line count you wish. -Steve ________________________________ From: owner-hecnet at Update.UU.SE on behalf of Jean-Yves Bernier Sent: Tue 2/16/2010 16:04 To: hecnet at Update.UU.SE Subject: Re: [HECnet] Apples MAC OS X pcap library... At 11:54 AM +0100 2/16/10, Johnny Billquist wrote: When a packets is sent from machine B it goes to the switch. The switch either sees a broadcast packet, and forwards it to all ports, or a packet for a specific MAC address, and forwards it to the port of machine A. Well, I suppose the bridge had announced over the LAN that it is DECNET nodes such, then machine B "believes" A hosts those nodes, right? So the bridge has NOT to sniff unicast traffic, because packets are addressed to it. When a packet is received by machine A by the bridge from another place, the bridge program then injects the ethernet packet on the local network. Catched it. No need for EDT clones when you have EDT... :-) EDT is excellent but being jailed to 24 lines is terrible nowdays. We also have a TU77 and a TU78. But for those I need to connect and fix things up. The TU81 can do fit. I've seen it on your pictures. We have succesfully recovered data from DC600 cartridges written circa 90, but my tapes were written in 1985 so chances are low. They have been stored in a dry and cold place, however. The 11/60 don't need 3-phase. I'm puzzled here. A general question: this is HECNET list, are non-networking RSX questions off topic? I have a lot, but i don't want to bother :-) -- Jean-Yves Bernier