20 Sep
2012
20 Sep
'12
6:38 p.m.
Hi,
On a working machine here (also simh). I have exactly the same
settings on every line of your show char below.
I did notice that on the first email, it was saying that SIMVAX was
in area 0. I don't know if that is relevant.
Can you do a set host to 1.13 ?
If you can set host, does a copy known nodes from 1.13 make any difference.
I maybe wrong but I think that if that is the only machine in the area
you will get unreachable as there is nothing else to reach.
Dan
On 20 September 2012 14:47, Mark Wickens <mark at wickensonline.co.uk> wrote:
Dan,
Thanks for the help.
Unfortunately it didn't make any difference.
License Management Facility V1.2
License Database File: SYS$COMMON:[SYSEXE]LMF$LICENSE.LDB;1
Created on: 16-SEP-2012
Created by user: SYSTEM
Created by LMF Version: V1.2
-----------------------------------
DVNETRTG DEC
$ show network
Product: DECNET Node: SIMVAX Address(es):
4.248
Product: TCP/IP Node: simvax.hecnet.eu Address(es):
192.168.1.127
NCP>show known areas
Known Area Volatile Summary as of 20-SEP-2012 14:46:17
Area State Circuit Next node to area
4 unreachable
NCP>show exec characteristics
Node Volatile Characteristics as of 20-SEP-2012 14:45:58
Executor node = 4.248 (SIMVAX)
Identification = DECnet for OpenVMS VAX V7.3
Management version = V4.0.0
Incoming timer = 45
Outgoing timer = 60
Incoming Proxy = Enabled
Outgoing Proxy = Enabled
NSP version = V4.1.0
Maximum links = 32
Delay factor = 80
Delay weight = 5
Inactivity timer = 60
Retransmit factor = 10
Routing version = V2.0.0
Type = routing IV
Routing timer = 600
Broadcast routing timer = 180
Maximum address = 1023
Maximum circuits = 16
Maximum cost = 1022
Maximum hops = 30
Maximum visits = 63
Maximum area = 63
Max broadcast nonrouters = 64
Max broadcast routers = 32
Maximum path splits = 1
Area maximum cost = 1022
Area maximum hops = 30
Maximum buffers = 100
Buffer size = 576
Nonprivileged user id = DECNET
Nonprivileged password = AUMIAWOSAJ
Default access = incoming and outgoing
Pipeline quota = 4032
Alias maximum links = 32
Path split policy = Normal
Maximum Declared Objects = 31
On Thu, 20 Sep 2012, Dan Williams wrote:
Hi,
You need :
ncp>def exec type routing iv
ncp>set exec state off
$@startnet
Also have you got dvnetrtg license loaded ?
That's what I normally forget.
Thanks
Dan
On 20 Sep 2012, at 12:05, Mark Wickens <mark at wickensonline.co.uk> wrote:
Bit of a puzzler here, but it'll probably turn out to be my
configuration.
When the SIMH VAX/VMS 7.3 instance SIMVAX is serving hecnet.eu I get the
following area/node stats reported:
Known Area Volatile Summary as of 20-SEP-2012 11:53:22
Area State Circuit Next node to area
4 reachable QNA-0 0 (SIMVAX)
Known Node Volatile Summary as of 20-SEP-2012 11:53:37
Executor node = 4.248 (SIMVAX)
State = on
Identification = DECnet for OpenVMS VAX V7.3
Node State Active Delay Circuit Next node
Links
1.1 (MAGICA) QNA-0
0
1.2 (ERNIE) QNA-0
0
1.3 (FNATTE) QNA-0
0
1.4 (GOBLIN) QNA-0
0
1.5 (ZEKE) QNA-0
0
1.6 (GNOME) QNA-0
0
1.7 (BJARNE) QNA-0
0
1.8 (KRILLE) QNA-0
0
...
So only my area known, and weird stats for nodes. Can anyone tell me what
is up with my configuration?
I'm running Johnny's bridge and if I bring up SLAVE, the AlphaServer
1000A, on the same area it reports all stats correctly. SIMVAX is currently
unable to see MIM. I set it up as a non-routing node. When I tried setting
it up via NETCONFIG as a routing
node I get everything unreachable.
Regards, Mark.
--
http://www.wickensonline.co.uk
http://declegacy.org.uk