6 Jun
2019
6 Jun
'19
10:32 p.m.
Ah, yes. That's the one. Sorry, my brain seems to work slowly tonight.
Johnny
On 2019-06-06 22:25, Kurt Hamm wrote:
This is what my ipnet location shows.? Is it
MLTCFG.TSK?
Kurt
Directory DU0:[IPNET]
6-JUN-2019 16:19
INS.CMD;172 ? ? ? ? 2. ? ? ? ? 27-JUN-2018 12:32
INSHECNET.CMD;1 ? ? 2. ? ? ? ? 10-JAN-2018 05:47
INS.NEW;208 ? ? ? ? 2. ? ? ? ? 11-JAN-2019 03:13
IPNET.NEW;106 ? ? ? 2. ? ? ? ? 11-JAN-2019 03:13
IPNET.CMD;208 ? ? ? 5. ? ? ? ? 11-JAN-2019 03:13
IP.OBJ;208 ? ? ? ? ?13. ? ? ? ?11-JAN-2019 03:13
MLTNET.TSK;209 ? ? ?16. ? ? C ?11-JAN-2019 03:13
MLTCOM.TSK;208 ? ? ?14. ? ? C ?11-JAN-2019 03:13
MLTCOM.STB;208 ? ? ?1. ? ? ? ? 11-JAN-2019 03:13
MLTCFG.TSK;208 ? ? ?18. ? ? C ?11-JAN-2019 03:13
IPLN.DAT;208 ? ? ? ?1. ? ? ? ? 11-JAN-2019 03:13
IP.DAT;208 ? ? ? ? ?1. ? ? ? ? 11-JAN-2019 03:13
IPDF.MAC;208 ? ? ? ?2. ? ? ? ? 11-JAN-2019 03:13
IPNCONFIG.CMD;106 ? 4. ? ? ? ? 11-JAN-2019 03:13
IP.TSK;197 ? ? ? ? ?3. ? ? ?C ?11-JAN-2019 03:13
IP.STB;197 ? ? ? ? ?1. ? ? ? ? 11-JAN-2019 03:13
Total of 87./87. blocks in 16. files
On Thu, Jun 6, 2019 at 4:13 PM Johnny Billquist <bqt at softjar.se
<mailto:bqt at softjar.se>> wrote:
Well, my point was just that ethernet is a better local networking than
point-to-point multinet links. But of course multinet links also works.
And I remember wrong. All the multinet stuff for RSX is under [IPNET]
? ?Johnny
On 2019-06-06 21:26, Kurt Hamm wrote:
--
Johnny Billquist? ? ? ? ? ? ? ? ? || "I'm on a bus
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?||? on a psychedelic trip
email: bqt at softjar.se <mailto:bqt at softjar.se>? ? ? ? ? ? ?||
Reading murder books
pdp is alive!? ? ? ? ? ? ? ? ? ? ?||? tryin' to stay hip" - B. Idol
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
I am looking in IP and there isn't anything
for MNC.
In terms of topology, I currently have two 3900s, Larry and Moe.
Larry
is configured for the connection to HECNet.? Moe
is configured
(decnet
over IP) to connect to Larry.? This seems to work
with both servers
being able to set host and see files on HECNet.
My idea was that I could have the PDP-11 (Frodo) point to Larry
as well
via DECNet over IP.
Is this what you are describing?
Kurt
Directory DU0:[IP]
6-JUN-2019 15:09
NTPDATE.TSK;210 ? ? 63. ? ? C ?11-JAN-2019 03:13
NTPDATRES.TSK;210 ? 42. ? ? C ?11-JAN-2019 03:13
MAILD.TSK;123 ? ? ? 237. ? ?C ?11-JAN-2019 03:13
PCL.TSK;210 ? ? ? ? 63. ? ? C ?11-JAN-2019 03:13
PCLRES.TSK;213 ? ? ?33. ? ? C ?11-JAN-2019 03:13
IFDRV.TSK;213 ? ? ? 7. ? ? ?C ?13-JAN-2019 14:47
IPDRV.TSK;213 ? ? ? 14. ? ? C ?13-JAN-2019 14:47
UDDRV.TSK;213 ? ? ? 16. ? ? C ?13-JAN-2019 14:48
TCDRV.TSK;213 ? ? ? 35. ? ? C ?13-JAN-2019 14:48
IFCONFIG.TSK;424 ? ?37. ? ? C ?11-JAN-2019 03:13
NETSTAT.TSK;424 ? ? 23. ? ? C ?11-JAN-2019 03:13
PING.TSK;424 ? ? ? ?64. ? ? C ?11-JAN-2019 03:13
TRACERT.TSK;424 ? ? 16. ? ? C ?11-JAN-2019 03:13
ETHACP.TSK;424 ? ? ?25. ? ? C ?11-JAN-2019 03:13
RESACP.TSK;424 ? ? ?24. ? ? C ?11-JAN-2019 03:13
RMD.TSK;400 ? ? ? ? 217. ? ?C ?11-JAN-2019 03:13
DHCP.TSK;409 ? ? ? ?67. ? ? C ?11-JAN-2019 03:13
DHCPRES.TSK;409 ? ? 45. ? ? C ?11-JAN-2019 03:13
RWHOD.TSK;396 ? ? ? 15. ? ? C ?11-JAN-2019 03:13
TFTPD.TSK;396 ? ? ? 64. ? ? C ?11-JAN-2019 03:13
INETD.TSK;409 ? ? ? 12. ? ? C ?11-JAN-2019 03:13
SPOOF.TSK;409 ? ? ? 12. ? ? C ?11-JAN-2019 03:13
WWW.TSK;409 ? ? ? ? 117. ? ?C ?11-JAN-2019 03:13
WWWRES.TSK;409 ? ? ?94. ? ? C ?11-JAN-2019 03:13
IRCBOT.TSK;409 ? ? ?66. ? ? C ?11-JAN-2019 03:13
FTPD.TSK;409 ? ? ? ?62. ? ? C ?11-JAN-2019 03:13
TELNETD.TSK;408 ? ? 26. ? ? C ?11-JAN-2019 03:13
TELNET.TSK;408 ? ? ?41. ? ? C ?11-JAN-2019 03:13
TFTP.TSK;394 ? ? ? ?106. ? ?C ?11-JAN-2019 03:13
IRC.TSK;408 ? ? ? ? 72. ? ? C ?11-JAN-2019 03:13
IRCRES.TSK;395 ? ? ?46. ? ? C ?11-JAN-2019 03:13
FTP.TSK;409 ? ? ? ? 67. ? ? C ?11-JAN-2019 03:13
TELCOM.TSK;402 ? ? ?3. ? ? ?C ?13-JAN-2019 14:48
Total of 1831./1831. blocks in 33. files
On Thu, Jun 6, 2019 at 3:17 PM Johnny Billquist <bqt at softjar.se
<mailto:bqt at softjar.se>
<mailto:bqt at softjar.se <mailto:bqt at
softjar.se>>> wrote:
? ? ?If you have my TCP/IP installed, and you have generated
DECnet with the
? ? ?Multinet lines, then things should be pretty
easy. MNC might
not be
? ? ?installed, but MNC.TSK should be in [IP], so
just install it
then.
? ? ?However, do you really have all your DECnet machines on separate
? ? ?ethernets? Otherwise I would really recommend that you have
DECnet on
? ? ?your local ethernet, and just have one
machine which is the
router to
? ? ?the outside from the ethernet segment.
Individual
point-to-point links
? ? ?will not be as efficient as the ethernet.
? ? ? ? ?Johnny
? ? ?On 2019-06-06 21:09, Kurt Hamm wrote:
? ? ? > New issue.? I am working to setup my (Oscar) PiDP-11 on HECNet
? ? ? > (Decnet).? The docs say that I need to run MNC to setup
the links
? ? ?for
? ? ? > DECNet, but I can't find that application anywhere.? I am
? ? ?assuming that,
? ? ? > for the PiDP-11,?NETGEN ?and IPNET have been completed.? I
just
? ? ?need to
? ? ? > configure my circuits and make sure the PiDP-11 has the
correct
? ? ?area.node.
? ? ? >
? ? ? > RSX-11M+ newbie, so sorry if I am missing something basic.
? ? ? >
? ? ? > Kurt
? ? ? >
? ? ? > On Thu, Jun 6, 2019 at 2:53 PM Johnny Billquist
<bqt at
softjar.se <mailto:bqt at softjar.se>
? ? ?<mailto:bqt at softjar.se <mailto:bqt
at softjar.se>>
? ? ? > <mailto:bqt at softjar.se <mailto:bqt at softjar.se>
<mailto:bqt at softjar.se <mailto:bqt at softjar.se>>>> wrote:
? ? ? >
? ? ? >? ? ?On 2019-06-06 15:04, Kurt Hamm wrote:
? ? ? >? ? ? > I wasn't sure where to post this question, so I
thought I
? ? ?would
? ? ? >? ? ?start here.
? ? ? >? ? ? >
? ? ? >? ? ? > I have two simh vax3900 machines.? Larry and Moe.
Larry
? ? ?is the
? ? ? >? ? ?HECNet
? ? ? >? ? ? > router for Moe.
? ? ? >? ? ? >
? ? ? >? ? ? > When I send email from Larry (via SMTP), the
_return
_email
? ? ? >? ? ?address is
? ? ? >? ? ? > correct (SYSTEM at LARRY.MYDOMAIN.COM
<mailto:SYSTEM at
LARRY.MYDOMAIN.COM>
? ? ?<mailto:SYSTEM at LARRY.MYDOMAIN.COM
<mailto:SYSTEM at LARRY.MYDOMAIN.COM>>
? ? ? >? ? ?<mailto:SYSTEM at
LARRY.MYDOMAIN.COM
<mailto:SYSTEM at LARRY.MYDOMAIN.COM>
? ? ?<mailto:SYSTEM at LARRY.MYDOMAIN.COM
<mailto:SYSTEM at LARRY.MYDOMAIN.COM>>>
? ? ?<mailto:SYSTEM at LARRY.MYDOMAIN.COM
<mailto:SYSTEM at LARRY.MYDOMAIN.COM> <mailto:SYSTEM at
LARRY.MYDOMAIN.COM
<mailto:SYSTEM at LARRY.MYDOMAIN.COM>>
? ? ? >? ? ?<mailto:SYSTEM at
LARRY.MYDOMAIN.COM
<mailto:SYSTEM at LARRY.MYDOMAIN.COM>
? ? ?<mailto:SYSTEM at LARRY.MYDOMAIN.COM
<mailto:SYSTEM at LARRY.MYDOMAIN.COM>>>>.
? ? ? >? ? ? >
? ? ? >? ? ? > When I send email from Moe (to
? ? ?LARRY::SMTP%"user at domain.com <mailto:user at domain.com>
<mailto:user at domain.com <mailto:user at domain.com>>
? ? ? >? ? ?<mailto:user at domain.com
<mailto:user at domain.com>
<mailto:user at domain.com <mailto:user
at domain.com>>>
? ? ? >? ? ? > <mailto:user at domain.com
<mailto:user at domain.com>
<mailto:user at domain.com <mailto:user
at domain.com>>
? ? ?<mailto:user at domain.com <mailto:user
at domain.com>
<mailto:user at domain.com <mailto:user at
domain.com>>>>"), the return
? ? ? >? ? ?email address is:
? ? ? >? ? ? > SYSTEM at SCSSYSTEMID.MYDOMAIN.COM
<mailto:SYSTEM at
SCSSYSTEMID.MYDOMAIN.COM>
? ? ?<mailto:SYSTEM at SCSSYSTEMID.MYDOMAIN.COM
<mailto:SYSTEM at SCSSYSTEMID.MYDOMAIN.COM>>
? ? ? >? ? ?<mailto:SYSTEM at
SCSSYSTEMID.MYDOMAIN.COM
<mailto:SYSTEM at SCSSYSTEMID.MYDOMAIN.COM>
? ? ?<mailto:SYSTEM at SCSSYSTEMID.MYDOMAIN.COM
<mailto:SYSTEM at SCSSYSTEMID.MYDOMAIN.COM>>>
? ? ? >? ? ?<mailto:SYSTEM at
SCSSYSTEMID.MYDOMAIN.COM
<mailto:SYSTEM at SCSSYSTEMID.MYDOMAIN.COM>
? ? ?<mailto:SYSTEM at SCSSYSTEMID.MYDOMAIN.COM
<mailto:SYSTEM at SCSSYSTEMID.MYDOMAIN.COM>>
? ? ? >? ? ?<mailto:SYSTEM at
SCSSYSTEMID.MYDOMAIN.COM
<mailto:SYSTEM at SCSSYSTEMID.MYDOMAIN.COM>
? ? ?<mailto:SYSTEM at SCSSYSTEMID.MYDOMAIN.COM
<mailto:SYSTEM at SCSSYSTEMID.MYDOMAIN.COM>>>>.
? ? ? >? ? ? >
? ? ? >? ? ? > Why is Moe using the SCSSYSTEMID instead of the
system
name?
? ? ? >? ? ? >
? ? ? >? ? ? > *I am missing something.*
? ? ? >
? ? ? >? ? ?I'm not sure how you should do a setup of mail
relaying in
VMS.
? ? ? >
? ? ? >? ? ?However, you can always send from Moe to
MIM::user at domain.com
<mailto:MIM%3A%3Auser at domain.com>
? ? ?<mailto:MIM%3A%3Auser at domain.com
<mailto:MIM%253A%253Auser at domain.com>>
? ? ? >? ? ?<mailto:MIM%3A%3Auser at
domain.com
<mailto:MIM%253A%253Auser at domain.com>
? ? ?<mailto:MIM%253A%253Auser at domain.com
<mailto:MIM%25253A%25253Auser at domain.com>>>. Those
? ? ? >? ? ?mails should then get correct
addresses.
? ? ? >
? ? ? >? ? ? ? ?Johnny
? ? ? >
? ? ? >? ? ?--
? ? ? >? ? ?Johnny Billquist? ? ? ? ? ? ? ? ? || "I'm on a bus
? ? ? >? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?||? on a
psychedelic trip
? ? ? >? ? ?email: bqt at softjar.se
<mailto:bqt at softjar.se>
<mailto:bqt at softjar.se <mailto:bqt at
softjar.se>>
? ? ?<mailto:bqt at softjar.se <mailto:bqt
at softjar.se>
<mailto:bqt at softjar.se <mailto:bqt at
softjar.se>>>? ? ? ? ? ? ?||
? ? ? >? ? ?Reading murder books
? ? ? >? ? ?pdp is alive!? ? ? ? ? ? ? ? ? ? ?||? tryin' to stay
hip" -
? ? ?B. Idol
? ? ? >
? ? ?--
? ? ?Johnny Billquist? ? ? ? ? ? ? ? ? || "I'm on a bus
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?||? on a psychedelic trip
? ? ?email: bqt at softjar.se <mailto:bqt at softjar.se>
<mailto:bqt
at softjar.se <mailto:bqt at softjar.se>>? ? ? ? ? ? ?||
? ? ?Reading murder books
? ? ?pdp is alive!? ? ? ? ? ? ? ? ? ? ?||? tryin' to stay hip" -
B.
Idol