4 Apr
2019
4 Apr
'19
4:37 p.m.
On 4/4/2019 03:27, Rob Jarratt wrote:
--
Sent via Thunderbird for Windows 10 on Lenovo Legion Y720
I actually built some code in my
user mode decnet router to periodically check IP addresses without blocking
and I reckon it would be quite easy to update the bridge to use the same
code.
Regards
Rob
Rob,
I looked around the internet for information about your user mode DECnet
router and saw a few posts and a mention at the 2012 retrochallenge website.
Does it compile on Linux? Is it open-source / can it be shared (i.e. can
one have a copy to experiment)?
Thanks
Supratim
-----Original
Message-----
From: owner-hecnet at Update.UU.SE <owner-hecnet at Update.UU.SE> On
Behalf Of Dave Wade
Sent: 04 April 2019 07:43
To: hecnet at Update.UU.SE
Subject: RE: [HECnet] Minimal Requirements
Johnny,
As I only have VMS systems, and a dynamic IP looks like I am stuck for a
while.
Dave
-----Original Message-----
From: owner-hecnet at Update.UU.SE <owner-hecnet at Update.UU.SE> On
Behalf
> Of Johnny Billquist
> Sent: 04 April 2019 00:48
> To: hecnet at Update.UU.SE
> Subject: Re: [HECnet] Minimal Requirements
>
> On 2019-04-03 23:42, Dave Wade wrote:
>> Folks,
>>
>> Do I still need a fixed IP address to have a node on HECNET? I can't
>> see anything on the HECNET web site.
>
> No you don't. But it do depend on how you connect.
> RSX mulitnet links using TCP handles if you have a dynamic IP address
> just fine.
> VMS multinet links I think not, and the bridge certainly do not.
>
> Johnny
>
> --
> Johnny Billquist || "I'm on a bus
> || on a psychedelic trip
> email: bqt at softjar.se || Reading murder books
> pdp is alive! || tryin' to stay hip" - B. Idol