17 Dec
2021
17 Dec
'21
7:14 p.m.
On Dec 17, 2021, at 11:08 AM, Supratim Sanyal
<supratim at riseup.net> wrote:
I turned the Ethernet circuit off and set up a DMC line to DECnet/Python. What seems to
be interesting is the Area does not seem to be propagating as part of the DECnet address
and confusing DECnet/Python. [Non-Issue, just saying.]
The following four things are reported in a loop.
Event type 4.11, Initialization failure, line fault#012 From node 31.32 (PIPY), occurred
17-Dec-2021 16:03:05.499#012 Circuit = DDCMP-31-42#012 Reason = Circuit
synchronization lost
Event type 4.10, Circuit up#012 From node 31.32 (PIPY), occurred 17-Dec-2021
16:03:15.473#012 Circuit = DDCMP-31-42#012 Adjacent node = 31.42
DDCMP-31-42 packet from wrong node 42
Interesting bug. That means DECnet/VMS is sending a Phase III style node address even
though it is reporting its version as Phase IV. The spec is very clear, this isn't
allowed and PyDECnet rejects it for that reason.
It would not be all that hard to put in a bug workaround and supply the local area number
in this case, just as would be done for a Phase III neighbor.
paul