10 Apr
2019
10 Apr
'19
5:56 p.m.
Here you go Brian.
Your IP: (which you already provided) : 45.62.248.66
Is IP static: YES
Hostname: (only really matters with dynamic IP): N/A
Source Interface: f0/1 (FastEthernet0/1)
Writable SNMP Community name: foobar
For reference, here is the currently running Tunnel12 to Tim's A12RTR:
Tunnel12 is up, line protocol is up
Hardware is Tunnel
Description: Tunnel to Area 12 A12RTR 12.1023 Tim Sneddon DECrouter
90T2 IOS V10.3 Perth, Western Australia
MTU 1514 bytes, BW 9 Kbit, DLY 500000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation TUNNEL, loopback not set
Keepalive not set
Tunnel source 10.42.2.204 (FastEthernet0/1), destination [redacted]
Tunnel protocol/transport GRE/IP, key disabled, sequencing disabled
Tunnel TTL 255
Checksumming of packets disabled, fast tunneling enabled
Path MTU Discovery, ager 10 mins, min MTU 92, MTU 0, expires never
Last input 00:00:02, output 00:00:18, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/0 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
464 packets input, 35549 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
275 packets output, 24288 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
Tunnel12 is up, line protocol is up, encapsulation is TUNNEL
Interface cost is 1, priority is 64, DECnet network: 0
Sending HELLOs every 30 seconds, routing updates 40 seconds
PhaseIV VAX cluster hold time is 300 seconds
Smallest router blocksize seen is 1498 bytes
Routing input list is not set, output list is not set
Access list is not set
DECnet fast switching is enabled
Number of L1 router adjacencies is : 0
Number of L2 router adjacencies is : 1
Number of non-PhaseIV+ router adjacencies is : 0
Number of PhaseIV+ router adjacencies is : 1
On 4/10/19 10:36 AM, Brian Hechinger wrote:
Ok, here's what I need from you.
You need to allow SNMP into the Cisco but you can limit that to only be
allowed from myst.platinum.net (199.166.5.172)
I need:
You IP: (which you already provided)
Is IP static:
hostname: (only really matters with dynamic IP)
Source Interface: (this is the interface on the Cisco that the GRE
tunnel(s) are on)
Writable SNMP Community name:
-brian
On Wed, 2019-04-10 at 09:32 -0400, Supratim Sanyal wrote:
> Brian,
>
> Behind NAT, protocol 47 forwarded. I can, of course, forward any port you need - just
let me know what to open and forward.
>
> I am already connected to A12RTR, BTW.
>
> Thanks
>
> Supratim
>
> On Apr 10, 2019, at 7:59 AM, Brian Hechinger <wonko at 4amlunch.net
<mailto:wonko at 4amlunch.net>> wrote:
>
> Is the Cisco device directly available on the internet? For my tool to work I need
that (although the new version I'm planning won't)
>
> -brian
>
> On Tue, 2019-04-09 at 16:24 -0400, Supratim Sanyal wrote:
> On 2/26/19 2:53 PM, Supratim Sanyal wrote:
>
> This email is directed to owners of Cisco routers with GRE tunnels; to
> the best of my limited knowledge, Dave McGuire, Ian McLaughlin, Brian
> Hechinger, Mark Darvill, Cory Smelosky, Peter L?thberg ... who else?
>
> I already have a stable GRE tunnel to A12RTR for a while now, and am
> looking for end-points on other Cisco routers on HECnet to connect to. I
> will be coming in from IP address 45.62.248.66, DECnet node 1.919.
>
> If possible, please let me know what GRE end-points I can connect to.
> You can, of course, DM me too.
>
> Thank you.
>
> Supratim
>
> Reviving this request, now that I am on my own Area 31. Once again,
> seeking GRE tunnel end points from owners of CISCO switches, to the best
> of my limited knowledge, perhaps Dave McGuire, Ian McLaughlin, Brian
> Hechinger, Mark Darvill, Cory Smelosky and Peter L?thberg.
>
> My IP will be 45.62.248.66, DECnet node 31.1023 (IMPRTR).
>
> Thanks,
> Supratim
>
>
>
--
Sent from a Compaq CQ61 running Linux Mint Tessa
-
Ain't got no cash, ain't got no style
Ain't got no gal to make you smile
Don't worry, be happy
- Bobby McFerrin