[HECnet] Downloading software to a DECSERVER 200 over MOP?

Ah and now I just need to copy the file from Kari's box? Sampsa On 14 Aug 2011, at 14:21, Kari Uusim ki wrote: Well, first you enable downline loading on your Ethernet adapter (EWA0 or which one you have on your machine) with LANCP. LANCP> SET DEVICE EWA0 /DLL=ENABLE Then you define your DECSERVER, its MAC address (which is written on a label on the DECSERVER) and the needed image in LANCP so that it can respond to the downline loading requests received from your DECSERVER. LANCP> DEFINE NODE DS200/ADDRESS=08-00-2B-11-22-33 /FILE=PR0801ENG.SYS Then you just power on your DECSERVER and wait a few minutes that it has done all selftests and downloaded the image. You can follow the downline loading on your Alpha console. Was the explanation understandable? Kari On 14.8.2011 16:05, Sampsa Laine wrote: I did not really understand any of that :) On 14 Aug 2011, at 14:00, Kari Uusim ki wrote: On 14.8.2011 15:15, Sampsa Laine wrote: Guys, Back for ages my DECSERVER used to boot up using someone's MOP box in Sweden I believe; This is no longer the case, and this being my only console access to RHESUS i would appreciate some instructions on how to set up this soft-downline-loading setup (and possibly the necessary binaries). Sampsa . Assuming you are using Alpha and VMS V7.3 or newer. $ MC LANCP LANCP> SET DEVICE EWA0 /DLL=ENABLE LANCP> DEFINE NODE DS200/ADDRESS=08-00-2B-11-22-33 /FILE=PR0801ENG.SYS LANCP> EXIT Copy the PR0801ENG.SYS image using the qualifier /continuous to the directory MOM$SYSTEM. You'll find the image using anonymous ftp at juhani.exdecfinlnd.org Kari .