[HECnet] Same MAC address on different nodes

My apologies, it's been too long to remember rsx. A netgen is too much work for an experiment. Background for the request: I had problems running two area routers on the same lan, though just one was simh based. Both were VMS though. Verzonden vanaf mijn BlackBerry 10-smartphone. Origineel bericht Van: Jean-Yves Bernier Verzonden: zondag 25 mei 2014 18:14 Aan: hecnet at Update.UU.SE Beantwoorden: hecnet at Update.UU.SE Onderwerp: Re: [HECnet] Same MAC address on different nodes At 5:52 PM +0200 25/5/14, Hans Vlems wrote: Mc ncp Def exec type endnode NCP>SET EXEC TYPE ENDNODE SET EXEC TYPE ENDNODE>> NCP -- Set not accepted, invalid parameter value, Type NCP>HELP SET EXEC Use the SET EXECUTOR command to create or modify executor node parameters. The format is: SET EXECUTOR parameters Parameter types are ALL or one or more of: DTE HOST STATE NODE INCOMING TIMER OUTGOING TIMER INACTIVITY TIMER RETRANSMIT FACTOR ROUTING TIMER SEGMENT BUFFER SIZE RECEIVE PASSWORD TRANSMIT PASSWORD VERIFICATION [STATE] CONFIDENCE TIMER MAXIMUM PATH SPLITS INCOMING PROXY OUTGOING PROXY Trying CFE. CFE Enter filename: LB:[5,54]CETAB.MAC CFE>HELP DEF EXEC Use the DEFINE EXECUTOR command to establish executor node parameters. The format is: DEFINE EXECUTOR parameters Parameter types are: ADDRESS BROADCAST ROUTING TIMER HOST IDENTIFICATION MAXIMUM ADDRESS MAXIMUM BROADCAST ENDNODES MAXIMUM COST MAXIMUM HOPS MAXIMUM LINKS MAXIMUM NODE COUNTERS NAME ROUTING TIMER SEGMENT BUFFER SIZE VERIFICATION STATE CONFIDENCE TIMER INCOMING PROXY OUTGOING PROXY MAXIMUM PATH SPLITS No way to SET/DEF EXEC ENDNODE. Both nodes have licenses for DECnet installed? Did not know DECnet used DRM. -- Jean-Yves Bernier