[HECnet] GRE tunnel working!

Cisco Internetwork Operating System Software IOS (tm) 3000 Software (IGS-BPRX), Version 10.0(6), RELEASE SOFTWARE (fc1) Copyright (c) 1986-1994 by cisco Systems, Inc. Compiled Tue 25-Oct-94 19:01 by dougs cisco IGS (68020) processor (revision A) with 4092K/512K bytes of memory. So this is a "Pancake", square box that opens so the bottom comes out with a plastic latch. Yes - it looks like a slightly flattened VAX 2000 with three LEDs on the front. A 25xx is a 1U rack mount thing. With a noisy fan too? I had some of these at work but I forget the more recent stuff more quickly than I forget the older stuff :-) ROM: System Bootstrap, Version 11.0(10c)XB1, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1) BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c)XB1, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1) System image file is "flash:c2500-ds-l.112-26.P7.bin", booted via flash cisco AS2511-RJ (68030) processor (revision K) with 14336K/2048K bytes of memory. This very old SW runs DECnet in GRE tunnels... -:) (But it will not fit in the 3000 with 4M memory. My mamemory fails me if it ws possible to put 4M modules in the IGS/3000, I think the answer is no.) My IGS has even older software - 10.0(6) but it seems happy to accept decnet configuration commands. It also allows me to configure a tunnel interface so hopefully it will do the job. It seems to be running ok after I reseated the SIMMs but I want to leave it on test for a while to make sure. I can't find any reference to the processor speed anywhere. It;s not show anywhere except in data sheets .. -:) I eventually found it written on the 68020 :-) Regards, Peter Coghlan.