30 Sep
2023
30 Sep
'23
4:46 p.m.
Oh, and for the really twisted part... I have actually played some with
XHomer. And I actually can get an XHomer instance up and running hooked
to HECnet.
However, something have become a bit broken on simh for me faking a
serial port. I need to check this up a bit, but I should be able to get
BJARNE:: online later today I hope...
Johnny
On 2023-09-30 16:20, Johnny Billquist wrote:
On 2023-09-30 16:15, John Forecast wrote:
NML should still be in there, yes. However, NCP is not.
Also, I'm not sure if even NFT is in there (but I would hope so). But
usually you access files, as everything else, through the menu system.
Even for remote machines.
Some things in P/OS are actually rather nice. It's just that it was so
limiting in other ways, and they locked themselves into slow hardware
and only use what the F11 could provide.
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt(a)softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
On Sep 29, 2023, at 5:24 PM, Johnny Billquist
<bqt(a)softjar.se> wrote:
On 2023-09-29 22:45, Robert Armstrong wrote:
I forgot about the management. I assume NML is still there for remote
management - Is NCP still there if you can get to a command line? > Dave McGuire <mcguire(a)neurotica.com>
wrote:
> I've gotten a Pro380 running at LSSM, and have just
> gotten a DECNA board installed. Can anyone point me to any docs for
> Pro/DECnet?
Is it safe to assume that you're running P/OS? Isthe P/OS
DECnet the
same as the MicroRSX DECnet?
No. Pro/DECnet is it's own thing.
Completely different management, tools and interface.
(It do share some amount of source with the RSX family, but it really
don't help much for anyone using it.)