[HECnet] Returning to HECNET

-----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Steve Davidson Sent: 30 January 2013 02:04 To: hecnet at Update.UU.SE Subject: RE: [HECnet] Returning to HECNET -----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Rob Jarratt Sent: Tuesday, January 29, 2013 18:50 To: hecnet at Update.UU.SE Subject: RE: [HECnet] Returning to HECNET -----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner- hecnet at Update.UU.SE] On Behalf Of sampsa at mac.com Sent: 29 January 2013 23:25 To: hecnet at Update.UU.SE Subject: Re: [HECnet] Returning to HECNET 2. Persuade someone who has a fixed IP to run the user mode router, if you register your IP with something like DynDns then the user mode router periodically checks for a change of IP. Is the user mode router ready? I could deploy that.. [Rob Jarratt] It has been used in a couple of configurations now and seems to work OK, I use it permanently now. You could try it and if it does not work for you it is only seconds to switch back to the bridge. Oh I was going to run the bridge as well, act as a sort of connections hub (Bridge, MULTINET on GORVAX and the user mode router). What OS does the user mode router run on? sampsa It runs on Windows (as a Windows Service) and it runs on linux (as a Daemon). I built the linux version on the Raspberry Pi using a flavour of Debian. I think it has been built on FreeBSD too. Regards Rob Would it run on NetBSD??? Not tried it so I don't know. I am not really very knowledgeable on all the different Unix flavours, but the code does not do a lot that is special so it should work. Try building it, if it doesn't compile or work let me know and I will build a NetBSD virtual machine and get it working. Regards Rob