[HECnet] HECnet bridge on tru64

Where can I find the hecnet bridge source code? On Wed, Oct 16, 2013 at 9:32 AM, Cory Smelosky <b4 at gewt.net> wrote: Sutocorrect here is fine with sampsa's name. HECnet-in-a-box is a neat concept...wouldn't be too hard to implement. Sent from my iPhone On 16 Oct 2013, at 12:28, "Michael Young" <young at ecn.purdue.edu> wrote: Autocorrect? :) On Oct 16, 2013, at 12:08 PM, Mark Wickens <mark at wickensonline.co.uk> wrote: good point samsung I'd forgotten that I had the bridge running on my raspberry pi so at least if nothing else I could sack in the laptop and take the pi instead however I'm going to see if I can't get it running on the sun. If that's the case we maybe want to make a list of the operating systems and versions for which the bridge has been successfully compiled. Sent from Samsung Mobile -------- Original message -------- From: Sampsa Laine <sampsa at mac.com> Date: 10/16/2013 5:00 PM (GMT+00:00) To: hecnet at Update.UU.SE Subject: Re: [HECnet] HECnet bridge on tru64 On 16 Oct 2013, at 17:18, Johnny Billquist <bqt at softjar.se> wrote: On 2013-10-16 11:57, Mark Wickens wrote: I am also taking a solaris box im presuming thatthe bridge would compile Ok on that? I have no reason to suspect it shouldn't work. But only testing will tell. And the same here - you might need to tweak a thing or two in the source. Johnny This got me thinking, could just customize a Raspian distro to run the bridge. Download the image, put it on a SD card and boot. Change network settings and enter uplink details in bridge.conf. bridge runs automatically in a screen launched by init (respawned if killed, of course). Instant HECnet-in-a-box :) Michael Young young at ecn.purdue.edu