[HECnet] Downloading software to a DECSERVER 200 over MOP?

Ok, log on to node CESIUM, user Hecnet passw is gast (case insensitive). In the logon dir you'll find p*.sys files, one for the DS100 and the other is for the DS200. The file MOPNCP.TXT tells you how to configure a DECnet load host PHONE SYSTEM for on line help Hans Verzonden vanaf mijn draadloze BlackBerry -toestel -----Original Message----- From: Sampsa Laine <sampsa at mac.com> Sender: owner-hecnet at Update.UU.SE Date: Sun, 14 Aug 2011 14:05:39 To: <hecnet at Update.UU.SE> Reply-To: hecnet at Update.UU.SESubject: Re: [HECnet] Downloading software to a DECSERVER 200 over MOP? I did not really understand any of that :) On 14 Aug 2011, at 14:00, Kari Uusim ki wrote: On 14.8.2011 15:15, Sampsa Laine wrote: Guys, Back for ages my DECSERVER used to boot up using someone's MOP box in Sweden I believe; This is no longer the case, and this being my only console access to RHESUS i would appreciate some instructions on how to set up this soft-downline-loading setup (and possibly the necessary binaries). Sampsa . Assuming you are using Alpha and VMS V7.3 or newer. $ MC LANCP LANCP> SET DEVICE EWA0 /DLL=ENABLE LANCP> DEFINE NODE DS200/ADDRESS=08-00-2B-11-22-33 /FILE=PR0801ENG.SYS LANCP> EXIT Copy the PR0801ENG.SYS image using the qualifier /continuous to the directory MOM$SYSTEM. You'll find the image using anonymous ftp at juhani.exdecfinlnd.org Kari