[HECnet] Older VAXVMS Install kits?

On 23 Dec 2012, at 20:48, "Brian Schenkenberger, VAXman-" <system at TMESIS.COM> wrote: Cory Smelosky <b4 at gewt.net> writes: On 23 Dec 2012, at 20:44, "Brian Schenkenberger, VAXman-" = <system at TMESIS.COM> wrote: Cory Smelosky <b4 at gewt.net> writes:=20 >=20 >> Directory DUA1:[000000]=20 >>=20 >> 000000.DIR;1 BACKUP.SYS;1 BADBLK.SYS;1 = BADLOG.SYS;1 >> =3D =3D20 BITMAP.SYS;1 CONTIN.SYS;1 CORIMG.SYS;1 = =20 >> INDEXF.SYS;1 =3D =3D20 SECURITY.SYS;1 SYSMGR.DIR;1 =20 >> VOLSET.SYS;1 =3D20=20 >>=20 >> Total of 11 files. --- snip ---=20 >=20 > What's in SYSMGR? You need VMB.EXE, it must be contiguous and it must > be referenced by LBN in the system disk's boot block (see WRITEBOOT). That would explain it. Still, there should be more than an .A save set. I might have the wrong tape. =20 >=20 >> And then:=20 >>=20 >> sim> b rq1 Loading boot code from vmb.exe %BOOT-F-Unable to locate = BOOT >> fil HALT instruction, PC: 000004C7 (BLBS 549,4C6)=20 >=20 > Granted, it's been a long long time since I booted an 11/780 but you = should > be able to use the normal boot file on the floppy of the LSI-11 = console. I > am puzzled with your boot command. It's SIMH. Ooops. Didn't realise I wasn't clear that it was virtual. OK. Somewhere there was mention of VAX-11/780... I know the real H/W. I have never bothered with SimH. Ah. I do think the problem lies with not having a bootblack on dual. -- VAXman- A Bored Certified VMS Kernel Mode Hacker VAXman(at)TMESIS(dot)ORG Well I speak to machines with the voice of humanity.