[HECnet] Attaching to hecnet

DECnet phase IV nodes are backwards compatible with phase III. There are no restrictions in functionality between phase IV nodes and phase V as seen by the unpriviledged user. Area routing may be an issue on Alpha, and of course ncl is more of a pain to remember than ncp ;-) Two questions: 1-May I use area 44? 2-Is there a short guide to set up DECnet over IP to connect to HECnet? Hans -----Oorspronkelijk bericht----- Van: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] Namens Marc Chametzky Verzonden: maandag, juni 2010 0:04 Aan: hecnet at Update.UU.SE Onderwerp: Re: [HECnet] Attaching to hecnet DECnet-Plus isn't able to connect, or at least reliably connect to all OS's that can potentially be on HECnet. I forget what all OS's I was having issues with, I know one was RSTS/E v10.1, but I want to say it also included VAX/VMS. Once I *upgraded* my Alpha running OpenVMS to DECnet Phase IV, all these issues went away. These were things as simple as SET HOST. It's probably that DECnet-Plus (Phase V) cannot speak with DECnet Phase III (such as on RSTS/E and TOPS-10/20). That's my guess anyway. Phase V should be able to communicate with VAX/VMS since that's Phase IV, which is the gold standard of DECnet, IMHO. --Marc Geen virus gevonden in het binnenkomende-bericht. Gecontroleerd door AVG - www.avg.com Versie: 9.0.830 / Virusdatabase: 271.1.1/2966 - datum van uitgifte: 06/27/10 08:35:00